Analogue control box with Bluetooth® wireless technology. The CA63 offers the best of both analogue and digital actuator systems for hospital equipment and adjustable healthcare applications, and enables wireless hand controls and footswitches.
The LINAK control box CA63 with analogue input offers a consolidated range of unprecedented features – all utilising standardised technology, interfaces and compatibility.
The CA63 for LINAK actuators is intended for the control of, for example, Home Care Bed. Equipped with 200 W SMPS, excellent and well-thought-out cable management as well as multiple easy mounting options, this control box opens up a wide range of application options for the provident hospital and care products manufacturer.
With the CA63, FET, IPX6 Washable DURA™ protection and a battery port are all standard options. The entire product platform supports the LINAK principle “One World – One box” – worldwide operable and applicable.
Power supply: Universal, SMPS , 200 W effect output (Switch Mode Power Supply), 100-240 VAC, 50/60 Hz -15% / +10%
Mains indicator: Yes - Green LED (mains connected)
Actuator interface: 4 channel, 6 pin Mini-Fit
Battery interface: 1 port 4 pin Mini-Fit (output 300 mA when no actuators are running)
Standby power: Approx. 0.5 W (230 V)
Colour: Light grey (RAL 7035)
Output short-circuit protected: Yes
Control concept: FET (no relay noise)
Power Supply Circuit Method: Half bridge
Duty cycle: 10% - 2/18 min. on/off continuous use.
Maximum power is 200 W
for 80 seconds and 100 W
for 40 seconds at 25° C
Weight: Low weight 0.5 kg
Actuator compatibility: Actuators with signal, feedback by hall and potentiometer.
Battery charger: Battery input available No charger, but supports battery with internal charger.
Charging indicator: Supported
LINAK | Electric Linear Actuator Systems
LINAK electric linear actuator systems - Lifting columns and height adjustment
Electric Linear Actuation from LINAK Australia
• LINAK Australia is a subsidiary of LINAK, an international company ...