The ZFP is a simple solution for mid-rate production for up to 7 cases per minute at a maximum load of 8 kg, where floor-space is often a constraint. The system can be easily deployed or redeployed across your facility into an existing packaging line without modification, replacing your manual palletising operations in minutes.
The ZFP combines the full functionality of the Universal Robots UR10 collaborative robot, with a purpose designed vertical lifting axis and swing arm system to support Australian Standard pallets (Chep/Loscam).
ADDE’s proprietary palletising software and simple touch screen interface allows quick and easy setup for rapid changeover, and can be configured to suit single or double pallet configuration.
While no guarding is required, operator safety is paramount. If an operator is detected in the carton pickup area the collaborative features of the UR10 will safely reduce the speed of the robot until the area is cleared. The zero pressure accumulation infeed conveyor will control the flow of product.
Up to 7 cases per minute
Up to 8 kg case load
Quick to install and easy to program
Rapid changeover for short runs
No bolt down required
No guarding required
Easily fits into existing end of line palletising area
Move from line to line as needed
Single pallet configuration for minimum footprint
Double pallet configuration for automatic pallet changing
Reduced labour costs
Reduced back injury risks
Andrew Donald Design Engineering | Industrial Automation Solutions
Andrew Donald Design Engineering Pty Ltd is a specialist in the design of industrial automation solutions. With extensive experience across a range of industries including pharmaceuticals, automotive, general manufacturing and material handling, we integrate the right combinations of robotics, custom machinery, tooling, sensors and control systems to deliver manufacturing solutions to your unique requirements.
Andrew Donald Design Engineering is a ‘full service’ solution provider, with in-house mechanical, electrical and control system design, procurement, manufacture, installation and support. We always work closely with our customers from the initial requirements development, concept development and systems design through to integration into production to ensure our solutions fully deliver to customer expectations.
We are both an ABB Authorised value provider and a distributor for Universal Robots industrial robotic arms so we are able to offer both traditional industrial robot solutions as well as the latest generation collaborative robots.
If you have a manufacturing bottleneck, quality control issue, labour cost issue or new manufacturing system Andrew Donald Design Engineering can solve your problems with a customised industrial automation solution.