Home Trusted by 500,000+ buyers

Adjustable Pallet Positioner - EZ-Loader

Supplier: Prentice Industries playlist_addCompare

When a pallet needs to be loaded or unloaded by hand, the operator would normally need to bend down to stack the bottom layers. He would also need to reach to the back of the pallet, or walk around it to access all edges.

Price Guide (Inc GST): POA

These two actions can add up to long term back pain, loss of manhours, increased insurance costs and job dissatisfaction..... not a happy scenario.

The EZ-Loader can remove the problems.

Charge the airspring with shop pressure air and disconnect supply [use airline fitting supplied with the machine]. The turntable will rise to 30" [ 76cm] above ground level.

Add the pallet, and working height is 36" [90cm] - very comfortable. Especially when a touch will cause the pallet to turn, presenting the opposite side for loading.

After loading one or more layers of product, you will be reaching up to stack the goods.... time to adjust the air pressure. Turn the knob until the top of the stack is at your preferred height, to suit YOU. from now on, when you add more product, the pallet will sink, keeping your work height where you want it.

Works the same when unloading pallets.

When the pallet is loaded, the forklift removes it, allowing the airspring to raise the turntable back up to 36".


Unless of course, you start to load a different... heavier or lighter ... product. Then it's one quick twist of the wrist - no need for mechanics to re-calibrate the springs.

  • Conveyor deck to transfer to different level option
  • Safety Skirt all round option
  • Wheel kit for manual positioning option
  • Simple Rim Brake for turntable option
  • Solid Deck option
  • Sturdy - will hold 2 tonne collapsed
  • Minimal maintenance
  • Locate by forklift
  • Aluminium cover for turntable