The Gross Pollutant Traps (GPT) Waste Water Treatment units operate with a vortex, producing low velocity conditions within the treatment device and a great discharge quality that exceeds all standards.
The AKS Industries SPEL Gross Pollutant Traps (GPT) range covers every application in the primary treatment field. For over 25 years AKS have designed, supplied and installed GPTs to the industry across Victoria and Tasmania.
The range starts with the Miniceptor, specifically designed to meet the need for a compact, high performing GPT for use on smaller pipe sizes and installations sites with space restrictions. This system comes standard with either 150mm or 225mm inlet and outlet pipes connections.
The solution when pipework and flowrates increase is the advanced SPEL Ecoceptor range. Produced in polyethylene or fibreglass configurations, these primary treatment units can be installed on pipes with diameters ranging from 225mm through to 1800mm. Custom units can also be produced to fit box culvert inlets.
On sites where the available space for installation is minimal, AKS recommends the Minicepor Offline GPT. Working offline, it treats the low flows relying on an external bypass for large flows.
A critical factor in sizing gross pollutant traps is how long each litre of water stays in the unit under full-flow conditions. The Miniceptor and Ecoceptor ranges have the longest dwell time in the industry, meaning pollutants are given additional time to fall out of the flow resulting in higher treatment performance.
In addition, we offer a complimentary stormwater modelling service within the Urban Stormwater Improvement Conceptualisation (MUSIC) and these systems can be utilised as either a standalone treatment device or as part of a more comprehensive treatment train.
Simpler and faster installation than Concrete GPT’s. Concrete systems come in many sections and parts, ours is one piece.
Saves space and excavation requirements.
Polyethylene or fibreglass construction allows for significant weight savings, therefore installation with the machinery as used for the excavation, avoiding costly crane hire.
Polyethylene and fibreglass are non-porous materials, meaning they are very easy to wash clean. Unlike the concrete systems available, our systems have no corners to clean as the bases are all dished for easy sediment removal.
Inlets and Outlets are built to suit your pipes. This means that most of the time there is minimal site works, no grouting and a more cost effective installation.
Whilst inline systems are the solution chosen by many, we also have an offline GPT for sites that require treatment of large pipe flows with a small footprint and low K factor.
Treat 100% flows. By using the Ecoceptor Class 3 we can treat all flows, not just the first flush. Even the full pipe flows are screened and treated removing TSS and Gross pollutants in all rain events.
Hydraulically efficient, AKS Gross Pollutant Traps are tested and certified in the primary treatment capture of sediment, total suspended solids, gross pollutants, hydrocarbons, oils and nutrients. These GPT units operate on a vortex principle, producing low velocity conditions within the treatment device and excellent discharge quality exceeding required standards.
Our GPT units operate with a vortex, producing low velocity conditions within the treatment device and a great discharge quality that exceeds all standards.
AKS Industries expertly trained service division are available for one-off call-out jobs or to establish a regular maintenance agreement. Talk to an AKS Industries technician about primary treatment servicing and maintenance.
For more information or a quote please call or use the Industrysearch Email form for a direct reply.
AKS Industries | Pumps, Waste Water Treatment & Water Storage
Established in 1989, AKS Industries began to develop a range of packaged pumping stations in response to the needs of the market for complete systems. These are not only reliable but require minimal maintenance.