The SPEL Cartridge Filter from AKS Industries is for Water Sensitive Urban Design (WSUD) and tertiary stormwater treatment. With its upflow spiral design,SPEL filter cartridge requires minimal footprint and provides consistent pollutant removal.
How does SPEL Filter Cartridge Waste Water Treatment work?
Hydraulic pressure forces the stormwater water up through the media
When the filter is full, a syphon starts and treated stormwater water runs out through the centre manifold pipework
On completion of a treatment cycle, the cartridge backwashes, dislodging particles from the filtration layers and re-establishing filter porosity
Dislodged particles accumulate with silt on the vault floor for easy removal during a maintenance cycle.
With its significant surface area, designated flow path and high flow capacity, the SPEL Filter can be installed in a variety of structures, including concrete pits, fibreglass stand-alone or cast in-situ structures.
Each system is optimised either by pre-treatment with our Gross Pollutant Traps (SPEL Ecoceptor or SPEL StormSacks) or the Stormceptor, to specifically suit site and local authority requirements by our qualified team.
Model for Urban Stormwater Improvement Conceptualisation (MUSIC) Modelling Performance
Greater than 87% TSS removal
Greater than 55% reduction in total phosphorous including dissolved phosphorous
Greater that 42% reduction in total nitrogen including dissolved nitrogen.
For more information or a quote please call or use the Industrysearch Email form for a direct reply.
AKS Industries | Pumps, Waste Water Treatment & Water Storage
Established in 1989, AKS Industries began to develop a range of packaged pumping stations in response to the needs of the market for complete systems. These are not only reliable but require minimal ...