The low profiled Connect2 Roof Anchor Point is designed to be used specifically on corrugated roof sheeting, such as BlueScope Lysaght's Custom Orb, as this sheeting is commonly used on pitches over 20° and therefore is visible from the ground. It makes sense that the aesthetically pleasing Customfix anchor point is used on these roofs to reduce the visual impact normally associated with surface mounted anchor points.
Connect2 Roof Anchor Points, however, are not recommended to be used on other roof profiles unless they are fixed into the pan of the sheet as the ribs of other profiles do not offer enough stability to this anchor point. Safemaster recommends using the Connect360, a specialised surface mounted anchor point, for other roof sheeting profiles.
The Connect2 Roof Anchor Point is fixed to the roof sheet using specialised structural rivets and the penetrations are seal using a neoprene tape affixed to the underside of the Customfix anchor point.
-205x205.jpg "Suspended Roof Walkway Platforms | Access 2")
