Asbestos hazard is referred to as the potential harm that the asbestos can cause, whereas asbestos risk refers to the probability of that harm occurring. An asbestos assessment is based on three possibilities:
The likelihood of exposure and accessibility to asbestos containing material
Condition of the asbestos containing material
Presence of friable asbestos containing material at the location
The competent professional (Asbestos Assessor) must analyse the results to effectively rate and rank the risks imposed by the asbestos containing material (ACM). The risk factors are ranked according to: low, medium, high, and extreme risk. A high or extreme risk factor is given in critical situations when immediate action is necessary to restrict access to the affected area until the ACM is removed. The decision that sparks from the four ranks will determine the measures that should be implemented for control, induction and training, heath assessment, and asbestos airborne fibre monitoring.
Asbestos Assessment Report
A report must be prepared by an accredited professional stating the date of the assessment and the individual responsible for conducting the assessment.
If a risk assessment report was in existence of the time of conducting the new assessment, this report should be reviewed and an assessment of the new findings documented in detail. The report must also have a conclusion of the findings along with recommended control measures.
Who should be informed about an Asbestos Assessment?
Anyone that could be affected directly or indirectly by the presence of asbestos should be informed of the assessment. This includes employees and neighbours. An asbestos containing material (ACM) report should be prepared and also made available to:
Asbestos removal contractors
Anyone that can be exposed to the deadly fibres
Anyone that will perform any type of work that could disturb the fibres
When should an assessment be done?
If your workplace was constructed prior to 2004, then you must by Australian Legislation haven an Asbestos Audit conducted.
If you believe that asbestos containing materials (ACMs) are present on your residential premises then you should obtain a professional assessment. Once the assessment has been completed immediate action must be taken to protect and inform those that have access to various areas containing asbestos containing materials (ACMs).
Additional assessment reports are necessary in accordance with the findings and recommendations of the asbestos assessor.
Certain asbestos containing materials (ACMs) on the premises require monitoring
Asbestos containing materials have been removed from the location or have deteriorated exposing humans to the airborne fibres.
Every Australian workplace must have an asbestos audit to identify potential problems, and every workplace constructed prior to 2004 must also have an Asbestos Register and Asbestos Management Plan to control any asbestos and promote a healthier environment.
Asbestos International's network of specialists offer:
• Personal service from friendly experts
• Rigorously trained, centrally managed consultants
• Legal and legislative compliance
• Competitive rates, with no hidden extras
• Rapid response, and long term assistance
Contact us today and put your mind at rest.