These MULTI machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations and with easily adjusted hold-downs at all five work stations to safely control the operations.
Comprehensive safety guards are fitted as standard on all work stations.
Free standing on a suitable floor, they just require electrical connection to be ready for work. For two operator utilization, the hydraulic system is activated by two shielded foot controls, one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the 3 shearing stations and the notch station.
The system gives accurate power inching at all five work stations and allows the machine to e stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations.
Centralized lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.
The universal ATLANTIC MULTI machines are delivered with an extensive range of standard features:
Large punch table with multi-purpose bolster
Removable table block for overhang channel.
Punch table, shear table an notch table standard equipment
Power inching and adjustable strokes at punch & shear end
Centralized pressure lubrication
Wide variety of applications for large hole punching: bar bending, tube notching,...
Mitre cut flanges of angle under shear blade
Work station guards standard fitment
Two cylinder operation
Overload relief on hydraulic system
Interchangeable bearings, seals and valves readily available in Australia.
Machines with very low maintenance
Swing away punch stripper unit
Easy change punch holder
One low volt halogen lamp on a movable magnetic base
Fine adjustment facility to the punch stroke
Measuring scales in the notch table
1m long touch and cut ruled length stop
Universal die bolster
Heavy-duty support tables with guides at shear station and notch station
Heavy-duty punch table with guides and backstop
Shear body blade with 4 cutting edges
Section arm & body blade with 4 cutting edges
Angle cutting arm & body blades with 4 cutting edges
Rectangular notch bolster blades with 4 cuttings edges
Work station guards
Instructions, operating and maintenance manual.
TECHNICAL SPECIFICATIONS: Based on material strength of 450 N/mm².
Model: MULTI 95
Maximum pressure: 95 Ton
Maximum Capacity: 27 x 25mm
Diameter x Thickness: 57 x 12mm
Stroke Length: 80mm
Standard Throat Depth: 355mm
Flat Bar – Max Thickness: 380 x 20mm
Flat Bar – Max Width: 480 x 15mm
Angle Flange Trim – Max 45º: 100 x 15
Working Height: 890mm
90º Cut: 150 x 15mm
45º Mitre (true int/ext): 80 x 10mm
Material Thickness: 13mm
Width - Rectangle: 52mm
Depth - Rectangle: 100mm
Motor Power: 7,5Kw
Machine dimensions: 200 x 81 x 200
HACO Australia | Sheet Metal Working Machines
As world leader in sheet metal working machines, Haco offers a complete range of reliable, high-precision machines and the software that goes with it. As an absolute specialist, we can provide a customized ...