ATS Electro-Lube was the first company to use this self-contained auto-luber technology. As the gas is produced, internal pressure builds up in the bellows and is applied against the orange piston.
The piston then forces the lubricant out of the cylinder and into the point of lubrication. The unit can empty from between 15 days to one year, depending on the setting of the simple, user-programmable DIP switch. This selection can be changed or turned off at any time.
Continuous lubrication using safe, inert, nitrogen gas. Continuous lubrication of bearings prevents intrusion of foreign matter, slows oxidation, aids in dissipating heat and ensures a constant supply of fresh lubricant
Available in 4 sizes: 2, 4, 8, or 16 oz. (60, 125, 250 or 475cc)
Pressures up to 50psi
Approved for all explosive environments. Certified Intrinsically Safe for Class 1, Groups A, B, C, D, E, F, and G. Also certified by MSHA and Energy, Mines Canada for use in mining. ATEX certified units also available
Multiple settings to empty from 15 days to 1 year
Suitable for indoor/outdoor use
May be remote mounted to 3' (1m)
Filled with customer-specified lubricant
Temperature Range: -40°F to +132°F (-40°C to +55°C) Note: Low-temp lubricants must be used at low temperatures