The Ultimate Luber is microprocessor-controlled, energy-efficient motor delivers grease to a fixed-displacement pump that produces pressures over 1000psi. This strength allows the ULTIMATE LUBER™ to drive lubricant through long feed lines and to cycle progressive distributors to feed several bearings consecutively.
When a dispensing cycle is selected, the units will activate at programmed intervals. At each interval, the Ultimate Luber™ dispenses approximately 1.25cc of grease. Neither temperature nor altitude will affect the lubricant output.
UL/CUL Div. 2 Hazardous Area approved
Available in 3 sizes: 4, 8, or 17 oz. (125, 250, or 500cc)
Single-or Multi-Point configuration
Refillable using a standard grease gun (no other tools needed)
Able to service up to 12 lube points with optional progressive distribution block
Available with long-life replaceable battery packs or optional external power sources (AC and DC)
Optional Remote Control available to connect to customer machinery or control equipment (e.g. PLC, Contactors, Relays)
Suitable for indoor-outdoor use
Optional easy to install mounting brackets and mounting plates for either single-or multi-point applications are available.
Multiple settings to empty from 15 days to 2 years
Operating range from -4°F to 131°F (-20°C to +55°C). Note: Low-Temp lubricants must be used at low temperatures
The Ultimate has an internal blender to minimize grease separation and enhance lube consistency