The ACP (Attendant Control Panel) is used with advanced hospital bed and nursing home beds where patient positioning must be carefully controlled by medical staff.
The ACP gives nursing staff direct control over critical positioning functions, while giving the patient a limited degree of adjustment. This high degree of selective control is vital with cases such as spinal injuries and other similar conditions where backrest positioning must be carefully supervised. The ACP is ergonomically designed and easy to install on even the most advanced equipment.
The ACP is mounted out of reach of the patient (for example at the foot of the bed) and serves to block the handset functions that may be inappropriate or even dangerous for the patient.
Ergonomic and compact design
High strength plastic housing protects the electronics
DIN-socket for HB40 when connected with CB9 or CB12
ACP with buttons can be used as an extra handset
A lamp indicates when the battery is being charged (only for CB14, CB18)
Available with or without buttons (the buttons function the same way as with a handset. To operate the ACP, two buttons must be activated at the same time, (for safety reasons).
Protection class: IP51
• 2500 mm straight cable
LINAK | Electric Linear Actuator Systems
LINAK electric linear actuator systems - Lifting columns and height adjustment
Electric Linear Actuation from LINAK Australia
• LINAK Australia is a subsidiary of LINAK, an international company ...