With the OpenBus™ system it is possible to use keypads as attendant control or hand controls integrated in the bed side rails.
There are two different variants of ACK: ACK1 and ACK3. ACK1 is with a single keypad, whereas ACK3 is able to work with two keypads at the same time (typically an inside side rail and an outside side rail).
ACK offers easy access to critical positioning functions and correct bed position in case of emergency. Another benefit is high adaptation to customer needs with customised key and diode layouts and keypads adapted to the requested design and colour.
Further benefits are included in the ACK3 version. It offers double and flexible bed control for the patient and the nurse to give increased comfort and efficiency. ACK3 allows for full intuitive bed control with up to 2x15 keys and 2x7 LEDs.
Features & Options:
The keypads can be used as attendant controls or hand controls.
Placed conveniently in the bed side rails allowing optimum ease of use.
Up to 12 keys and 7 LEDs possible with the ACK1
Up to 2x15 keys and 2x7 LEDs possible with the ACK3
Protection against single fault condition according to IEC60601-1 when connected to a LINAK OpenBusTM control box.
An LED which indicates when the battery is being charged (yellow)
There is no IP rating as standard. The customer must ensure a proper application design and build-in of the ACK unit to achieve the correct IP degree (e.g. IPX4).
Straight cables: 1250, 1800 or 2500 mm
Connection to CB or MJB via a “modular jack” cable (5-wired)
The standard ACK colour is grey (RAL 7035)
Possible to customise design and colours of the keypads
Possible to customise the layout of the keys and LED´s
LINAK | Electric Linear Actuator Systems
LINAK electric linear actuator systems - Lifting columns and height adjustment
Electric Linear Actuation from LINAK Australia
• LINAK Australia is a subsidiary of LINAK, an international company ...