Australia's #1 industrial directory for equipment & suppliers

Auger Drive Units - NK2 Borer

Supplier: Hydrapower

Features of Auger Drive Units - NK2 Borer:

CONTACT THIS SUPPLIER TO FIND OUT MORE

  • Supplied with a frame to suit the carrier machine with the option of a side shift frame.
  • Carrying frame incorporates a cradle to prevent unwanted auger swing when traversing the job site.
  • 65mm round or 50.8mm hexagonal output shaft available.
  • Maximum pull-out force is 6 tonne.
  • In standard configuration maximum output torque is 2525 Nm.Maximum output speed is 74rpm.
  • The gear-set used in the gearbox is capable of withstanding torques of 3,500 Nm (2,580 ft/lbs).
  • Augers from 100mm - 600mm (4"-24") in diameter.
  • Standard digging length of the augers is 1500mm (5 ft).
  • Borer will go down a 250mm post-hole, increasing the digging depth by a further 700mm.
  • Can be fitted with earth teeth or tungsten carbide teeth (both types of teeth and pilot bits use the same adapters). Rock teeth are also available.
  • Extensions from 500mm to 1500mm are available.
  • Operating Pressure: 103 - 207 bar (1500-3000 PSI)
  • Operating Flow: 30 - 75 l/min (8-20 GPM)

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more