auxiliary supply voltage: 110…240VAC 12/24VDC only for ATL 610.
operating range: 90…264VAC; 9…36VDC only for ATL 610.
Voltage measurement inputs:
rated voltage Ue: 100…480VAC (L-L)
measuring range: 50…576VAC (L-L).
frequency range: 45…65Hz..
Programmable digital inputs
Programmable relay outputs
5 each with 1 normally open contact (NO – SPST) rated 8A 250VAC.
2 each with 1 changeover contact (NO/NC – SPDT) rated 8A 250VAC.
flush-mount housing: 144x144mm/5.7×5.7”.
protection rating: IP40 on front; IP65 optional with seal EXP80 01; IP20 at rear.
• single in AC for ATL600.
• dual in AC and DC for ATL610.
Measurement inputs for three phase + neutral voltage values; also suitable for 1 and 2 phase lines.
128×90 backlit graphic LCD to display measurements, events and alarms in 5 languages (English, Italian, French, Spanish and German).
2 status indication LEDs
6 programmable digital inputs.
7 programmable relay outputs.
Viewing of L-L and L-N voltage values of the controlled lines.
Status viewing of contactor or motorised circuit breakers.
Configuration programming of lines, control and supervision parameters for emergency demand of generating set.
Microprocessor supervision of functions; including virtual real time clock for ATL610.
Communication interface via front optical port with CX01 or CX02 dongle using USB or Wi-Fi.
Compatible with Synergy supervision and energy management software, Xpress remote control and configuration software and with the Sam1 application for Androids/iOS.
Modbus-RTU, ASCII and TCP communication protocol.
Control Functions of the Lines:
Phase sequence and phase loss.
Minimum and maximum voltage.
Minimum and maximum frequency.
Non-expandable, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×7.7″), 110…240VAC supply, 0.600kg.
Expandable with EXP… modules, transfer switch controller, automatic with optical port for 2-line control (144x144mm / 5.7×5.7″), 110…240VAC supply and 12/24VDC, 0.680kg.
Mechtric | Industrial Automation & Control Products
The Mechtric Group is a 100% Australian owned group of companies specialising in the supply of electrical and mechanical engineering products.
Our product range consists of a wide range industrial ...