The high efficiency fine screen prevents screenings accumulation and its exceptional capture rate significantly reduces maintenance costs in downstream equipment.
With the BANDGUARDTM screening is achieved by passing the sewage through a vertical band shaped screen curtain. It comprises an assembly of plastic perforated panels, clipped and fastened into stainless steel frames which are fastened to stainless steel conveyor chains that form two endless loops.
The screenings enter the centre of the screen, inside of the screen curtain where solids are retained and transported out of the flow by driving the band, moving the dirty panels from the screening zone to the panel cleansing area.
The band is sprocket driven via a motor and gearbox. A spray bar fed by final or primary effluent is used to clean dirty panels before the panels are re-submerged. The cleaning system is orientated to achieve full panel cleaning whilst depositing all debris in the internal launder system, which feeds out through the side of the screen.
Each panel has replaceable side seals manufactured from UHMWPE fitted between the chain and panel to effect a close tolerance seal with the chain guide fitted to the screen structure.
The main structural side plates are designed and manufactured for strength and rigidity.
The high strength chains run in steel and UHMWPE guides and are driven by sprockets attached to the head shaft running in adjustable bearing units.
The drive is from a close coupled motor and gearbox. Variable or Dual speed drives are available as options and the screens can be supplied to suit ATEX Zone 1 environments
The BANDGUARDTM is fully guarded by covers fastened to the main screen structure thus encasing odours and wash water aerosol. The screen can be supplied with odour extraction pipework flanges where requested
The BANDGUARDTM can be inched forward and reverse, in case of mechanical stoppage.
Features and benefits:
Screen widths of up to 4m and depths of 20m can be provided.
Carry over and hairpinning prevented.
Plastic panels with 2mm to 6mm diameter holes.
Stainless steel and carbon steel construction.
Available with integral washing compactor.
Highly efficient side sealing arrangement.
All maintenance can be undertaken above coping level.
200mm, 300mm and 450mm chain options.
SPIRAC | Screening, Grit & Sludge Equipment
Municipal screening, grit and sludge handling solutions are our primary focus, but SPIRAC also offers conveying, dewatering and washing solutions for industrial applications. The SPIRAC network of engineers is on hand to collaborate with you right from the start of your project. Our team will ensure that all solutions are manufactured, installed and maintained in compliance with local specifications and best global practice.
And don’t forget, full after sales support is part of SPIRAC’s service.
Shaftless Spiral Conveyor Systems
SPIROTAINER® containment & transport
- Screens (RAKEGUARD raked coarse screen, CHAINGUARD coarse screen, FINEGUARD traveling fine screen, BANDGUARD centre flow band screen, SPIROGUARD®, STEPGUARD®)
- Screenings washing (SPIROWASH®)
- Dewatering & compaction (SPIROPRESS®)
- Grit capture & separation (SANDSEP®, Grit Vortex)
- Grit washing (SANDWASH)
- Silos (Live Bottom & Sliding Frame)