Australia's #1 industrial directory for equipment & suppliers

Bearing - Hallite 506

Supplier: Hallite

Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Design

Hallite 506 bearing strip is available in three forms: cut rings, spiral lengths and flat coils. Hallite 506 provides an extremely effective, hard wearing and easy to use bearing material.

Manufactured to very tight tolerances and providing bearing solutions for reciprocating, oscillating and slow rotary movement applications.

Hallite 506 bearing strip is used in many of today's most arduous hydraulic applications around the world.

Commonly fitted in reciprocating cylinders as rod and piston bearings, Hallite 506 is capable of withstanding extreme side-loads preventing metal to metal contact.

The materials design incorporates micro indentations on the bearing strip`s surface to trap fluid and provide built-in lubrication to the bearing.

The 506 bearing strip is manufactured by a patented process, using a woven fabric reinforced polyester resin material and is proven to be compatible with a wide range of fluids, including mineral oils, water based fluids and phosphate esters, to produce a rectangular section strip which is available in a wide range of inch and metric sizes including cross sections specified in ISO 10766.

Hallite 506 bearing strip is available in three forms:

Cut Rings

Ready made bearings, cut to size and to customer specifications, and ready for installation, Hallite 506 bearings have become an industry standard favoured by designers and specifiers alike. Generally produced for the medium to high volume user.

Spiral Lengths

Available in a wide range of preformed diameters, spirals are supplied in continuous lengths to suit a range of inside and outside diameters. Ideal for lower volume users requiring various diameters.

Flat Coils

Packaged in a dispenser for ease of storage and handling, flat coils are supplied in l0 meter lengths suitable for a wide range of diameters and are ideal for those using or supplying one off bearings for small volume requirements.

The ranges shown on the following pages are Hallite's most popular sizes. The section ranges identify section and groove width; from these nearly any diameter of cut ring or spiral length can be manufactured. If you cannot find the size you are looking for, please contact your local Hallite sales office for additional size information.

All standard bearing strip is printed with a size reference and includes distance marking every 100mm on metric size sections and every six inches on inch size sections for guidance only. Lengths or flat coils are required.

For cut rings and spiral lengths please state whether rod or piston application and provide inside or outside diameters, groove width and section dimensions and where spiral lengths are ordered also specify length required. For flat coils please specify groove width and section dimensions.

Cutting bearing strip to size

  1.  Select the groove width and section required.
  2.  In the case of a rod bearing, position the bearing strip around the rod or in the case of a piston bearing, place it in the piston groove and mark the point of overlap. Determine the correct width of bearing split for the or being used, as indicated in the technical details, and make a second mark.
  3.  Remove the strip and cut at the second marked position to the desired angle using secateurs or other similar cutting tool. It is recommended that the standard cutting angle is used for the majority of applications.

Features

  • High load capability Infinite Length Range
  • Virtually Zero swell
  • Self lubricating Low Friction
  • Cut to Length
  • Very large range of sizes

To Know More about Bearing  Please click here

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more