K-Sure® Belt Support System
Kinder Australia’s K-Sure® Belt Support System is designed to provide a consistent and stable support for the troughed conveyor belt profile by reducing the number of rotating conveyor components. The Support System eliminates any belt edge sag and therefore increases the effectiveness of the skirting seal.
Belt sag is usually caused when there are too few idlers installed at the loading point. The K-Sure® Belt Support System corrects this by utilising the existing conveyor idler frames and load carrying the centre conveyor roller. The wing rollers are then placed by the K-Sure® Belt Support System’s universal adaptor brackets and low friction polymer belt support rails. Available in standard 2-metre length assembly kits; other lengths can be modified upon request.
The System requires no pre-engineering, adjustments or special tools. The outcome is successfully controlled spillage and contained dust leakage.
For a conveyor transfer point system which requires inspection or fast access to the belt, the K-Drop Down Transfer Point belt support system is available.
A key feature of the K-Impact Belt Support is that it has no moving parts to fail and therefore is free of continual maintenance. The 12mm thick UHMW polyethylene wear surface allows the belt to slide freely over the cradle surface. The cradle is designed to interchange with existing idlers to maintain the same belt height.
The K-Impact Slider Bars form a continuous seal and protect the belt from early failure due to pinch point damage. The smooth curved trough supports the belt over the entire surface, preventing conveyor belt punctures and tears.
The key design features of the K-Impact Belt Support are:
- No moving parts
- Energy absorbing Impact Bars
- Modular design
- Fire Resistant Anti-Static (FRAS) available