Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full without the rigors and risks associated with climbing and continuously checking bins levels. When material is not in contact with the paddle, the paddle rotates freely. When the paddle comes into contact with dry bulk material, the paddle stops rotating and sends a signal – normally through the use of a horn or light – to alert that the bin is full.
The BinMaster BMRX features “de-energized” operation of the motor which shuts the motor down when materials is present, versus competitive rotaries which put the motor in a "stalled" condition. Power is not consumed until the bin is emptied and the drive shaft again begins to rotate – which saves on energy costs and prolongs motor life. It offers a fail-safe alert providing notification when power to the unit is lost. The BMRX rotary design includes a screw-top enclosure for easy access to motorized parts. It is CE approved and is appropriate for use in hazardous conditions when explosion proof protection is needed – featuring Class I, Groups C and D, Class II E, F, and G listings.
Rugged construction and simple, dependable design
Triple thread screw-off cover
Switch selectable high/low fail-safe
De-energizing motor for extended operational life
Four-bearing shaft assembly reduces wear and increases reliability
Internal, bi-directional clutch
Various voltages available
DPDT relay output, 250 VAC, 10 Amp
Dual conduit entrance
Removable wiring terminals
Interchangeable with other rotaries
Reliable point level detection for bulk solids including powders, pellets and granular materials
Used in bins, silos, chutes and conveyors
Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials
Pacific Sensor Technologies Pty Ltd | Data Loggers, Multiloggers, Gas Detectors & Pressure Transducers IndustrySearch Trusted Supplier
Pacific Sensor Technologies Pty Ltd is an ISO-9001 (2015) Certified Company.
One hundred percent Australian owned and operated, our head office is situated in Rowville Victoria on the foot of the ...