Australia's #1 industrial directory for equipment & suppliers

Bin Tippers | Dumpmaster 'WideSeries'

Supplier: Optimum Handling Solutions

Optimum ‘Wide Series’ Dumpmasters employ the same efficient tipping geometry as the well-proven ‘Standard Series’ machines. They are available with cradles to suit a range of larger bins, including 660l, 1000/1100l wheelie bins, or square and rectangular bins.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Attachments are available to enable multiple bin sizes to be tipped, for example a cradle for tipping 1100l bins can be fitted with auxiliary catches to enable all standard wheelie bins from 80 litres up to 660 litres to be tipped as well. No adjustment is required for tipping the different sizes – simply wheel the bin in and empty it.

Optimum ‘Wide Series’ Dumpmasters can be made to tip at any practical height. They normally have a hot-dip galvanised frame and cradle, with zinc-plated guarding. However, some or all of the machine components can be made from stainless-steel for use in hygiene-critical areas or harsh environments.

Features of the Dumpmaster 'WideSeries' include:

  • 4 standard tipping heights, but can be economically built to tip at any height.
  • Cradles are available to suit virtually any size and shape of bin.
  • Safety and Operating instructions at eye level
  • Isolating key switch or Emergency Stop
  • Weatherproof controls
  • Optional front guard panel
  • Battery, 1-phase, or 3-phase power options
  • Hot-dip galvanised main frame
  • Zinc-plated welded wire mesh guarding
  • Safety door interlock system has a double-break contact with mechanical separation as required by safety standards
  • Compact design, takes less than 1m2 of floor space
  • Non-marking castors or bolt-down lugs
  • Optional foot guards

Options available include:

  • Guarding options and accessories:
    • Swing-up door: a swing-up door supported by gas truts may be fitted instead of the standard side-hinged door(s)
    • Foot guards: foot guard pressings are available
    • Operator guard: a polycarbonate guard screen is available to protect the operator from glass or chemical splashes
    • PET-G guarding: PET-G guarding panels are available in place of the standard welded wire mesh guards. (PET-G is virtually unbreakable)
    • 25mm mesh guarding: the standard mesh is 50 x 4mm, which allows fingers through but no more
    • Left-hinged door: Left-hinged doors are available if specified at the time of ordering
  • Electrical options and accessories:
    • Power supply: Dumpmasters can be powered by 1-phase, 3-phase, battery, (or even compressed-air for use in hazardous areas)
    • Auto-cycle option: auto-cycle controller is available for mains-powered machines only
    • Solar panel: machines that are used outside can be fitted with a solar panel
    • Door-end controls/2-hand controls: The controls can be mounted at the ‘door end’ of the machine so the operator is well away from the product as it empties
    • Certified door latch: approved door switches can be fitted if required
    • Additional controls: additional controls can be fitted on the opposite side to standard, several options are available
  • Other options and accessories:
    • Frame-mounted chutes: two standard frame-mounted chutes are available, Custom chutes are also available
    • Bin hooks: The Bin-Hooks kit attaches quickly and easily to most Dumpmasters, allowing them to be attached securely to a bin or skip
    • Stainless-steel construction: Dumpmasters are available either completely constructed from stainless-steel, or with selected components made from stainless-steel
    • Corrosion-resistant lifting chains: These offer a similar level of corrosion-resistance to stainless steel while retaining the strength of standard chains
    • Scales: Where product needs to be accurately weighed, platform scales can be provided to fit under the cradle

Specifications for the Dumpmaster 'WideSeries':

Wide Series' Dumpmaster 660
Tipping Height Width Length Overall Height  
1500 1780 1275 3155 (T+1655mm)
1800 1780 1275 3455 (T+1655mm)
2100 1780 1275 3755 (T+1655mm)
'Wide Series' Dumpmaster 1100
Tipping Height Width Length Overall Height  
1500 1780 1525 3245 (T+1745mm)
1800 1780 1525 3545 (T+1745mm)
2100 1780 1525 3845 (T+1745mm)

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more