semi gloss or matt painted finish, containing no toxic solvents, resins or heavy metals.
It is suitable for use on toys, paneling, skirting boards, architraves, doors and \windows. Extreme low VOC - less than 1gr. Per Litre.
Prepare the surface in accordance Australian Standard 2311 Painting of Buildings. Do not apply coatings to unseasoned or wet timber. Surfaces and already painted surfaces in gloss or semi glass paint should be well sanded, dry and cleaned of greasy, waxy and dirty contaminants using BIO Thinner.
Round off sharp edges. It is also good practice to prime back surfaces. Hardwoods and other timbers rich in natural oils, waxes, acids and terpenes should be degreased using Bio Thinner because these substances may mix with the paint and prolong its drying time.
Imperfect coatings may require complete stripping before applying BIO products. Timber moisture content must be under 15% for softwood, and under 12% for hardwood. Fill imperfections and cracks with a suitable filler.
Stir thoroughly before use with a broad flat stirrer. Apply one coat of Undercoat on new or imperfect surfaces and two coats of topcoat.
Thin as desired with water only to obtain a smooth flowing consistency. Minimum dry film thickness is 100 microns.
Maintain a wet edge when painting. Best results are achieved using thin coats. Thick coats will cause runs to appear.