It is resistant to dirt and moisture. Suitable for exterior panelling, garden furniture, windows, sandpits, box framing, rafters, pergolas etc.
Not to be used on alkaline surfaces, plaster, concrete or fibro-cement. If considering use on those materials a test-strip should be made to assess suitability.
Protection against weather and wood-destroying ultra-violet light. One to three coats are recommended depending on the absorbency of the timber.
Box frames, timber windows, cladding and end grains must be treated B E F O R E INSTALLATION. It is also good practice to prime all back surfaces.
Prepare surface in accordance with AS 2311 Painting of Buildings. Do not apply coatings to unseasoned or wet timber. Round off sharp edges.
Wood and other surfaces should be well sanded, dry and cleaned of greasy, waxy and dirty contaminants using BIO Thinner. Imperfect coats may require complete stripping before applying BIO Products.
Hardwoods and other timbers rich in natural oils, waxes, acids and terpenes should be degreased using BIO Thinner, because these substances may mix with the oil and prolong its drying time.