BOSS 104CFM / 20HP Dual Air Compressor - BC104-600LK

The BOSS 104cfm/ 20hp Dual Compressor is of 104cfm Piston Displacement (PD), 72cfm Free Air Delivery (FAD), 2 x 10HP (20HP) MEPS Approved Electric Motors and 2 x 300L Tanks (600 litres) Australian Standards AS1210.

Package

• 2 x Model- BC52-300L BOSS 52cfm/10hp Air Compressors with 300L tanks
• 1 x 20hp dual system control box with wiring
• 1 x Fittings and hoses for system set up
• 1 x Donaldson refrigerated air dryer with pre & post filters
• 1 Year parts & factory labour warranty

Features

• Duel control box included
• Delay Start saving power and down time
• Run both units or one unit on quiet days
• Switch units for servicing or breakdowns
• Heavy duty cast iron pumps
• MEPS approved electric motors
• German pressure switch
• AS1210 approved air receivers

Donaldson Dryer & Filter Package

With over 30 years of expertise, Donaldson can deliver the most efficient and cost-effective clean air solutions.

Aluminium Heat Exchanger – Low operating cost due to marginal compressed air losses. No corrosion inside the heat exchanger due to contact with wet compressed air

Hotgas Bypass Control – Proven and reliable technology with easy handling. Constant dewpoint even with approximately +20 c

Potential Free Alarm Signal – Economical operation and safe system installation in the compressed air network.

Electronic Level Control Condensate Drain – No compressed air losses due to condensate removal

Compact & User Friendly – Minimum space requirement. Installation is made easy by the access to all connections from one side. Clearly visible operator control panel. Minimum maintenance required.

Warranty - 2 Years part & factory labour warranty

Operating Features

The duplex air compressor is supplied with a multi-functional control box that allows you to run the compressors 2 different ways.  

• Run both units together- one unit will start with a 3 sec delay on the second unit. This allows a low current draw on start up. Both units will run up to pressure and cut out together this will repeat on each cycle. Dual system design means total air loss is a thing of the past.

• Run unit 1 or unit 2 - This will allow you to run number 1 unit or number 2 unit at separate times. If one unit breaks down you can flick the switch & run the other unit until repaired. Run one system while servicing the other. Run both systems on busy days or one system on quiet days.