Home Trusted by 500,000+ buyers

Box PC for Industrial Applications | MEN BC50I

Supplier: OEM Technology Solutions

The MEN BC50I Box PC for Industrial Applications / AMD is a maintenance-free box computer that has been designed for independent use or as display computer electronics for use in industrial applications, e.g. for machine control, surveillance or commercial vehicles or robotics.

Price Guide: POA

Main Features of the MEN BC50I Box PC for Industrial Applications:
  • AMD Embedded G-Series Dual-Core APU
  • 2 Gigabit Ethernet
  • 2 USB 2.0
  • 2 DisplayPort® outputs, full HD with each display
  • WLAN, UMTS, GPS, GSM, HSDPA, EDGE, LTE via 1 PCI Express® Mini Card slot
  • 2 Slots for IBIS, GPS, RS232, RS485, RS422
  • 1 CAN Bus interface optional
  • 24 VDC nom. (16 to 36 V)
  • -40 to +70°C operating temperature

It is powered by an AMD Embedded G-Series APU (Accelerated Processing Unit), the T48N, running at 1.4 GHz. The G-Series combines low-power CPUs and advanced GPUs, in this case an AMD Radeon™ HD 6310, into a single embedded device. The use of the Embedded G-Series makes for high scalability in CPU (single/dual core) and graphics performance (various Radeon™ GPUs or none at all).

The BC50I is equipped with 2 GB of DDR3 SDRAM and offers SD card and mSATA slots. A SATA hard-disk/solid-state drive can be installed within the housing as an option. The system is designed for fanless operation at temperatures from -40 to +70°C, its special aluminum housing with cooling fins serves as a heat sink for the internal electronics and in this way provides conduction cooling.

The BC50I supports up to two DisplayPort® interfaces with a maximum resolution of 2560x1600 each. The DisplayPort® interfaces and all other I/O are available at the unit's front panel on standard connectors like USB, 9-pin D-Sub (optional serial I/O), RJ45 (Gigabit Ethernet) and DisplayPort®. On the inside, the system offers one PCI Express® Mini card slot with a SIM card slot. The necessary antenna connectors can be made available at the front panel.

The BC50I comes with its own integrated 24 VDC nom. (16 to 36 V) power supply. The power can be switched on and off using an ignition signal on the power connector, and a run-down time after switching off the power can be adjusted by software.

The combination of the various CPU/GPU options with the available selection of external interfaces (realized via separate graphics and I/O interface boards within the system) makes for an extremely flexible system design that can quickly be tailored to a vast number of applications.