Australia's #1 industrial directory for equipment & suppliers

Brevini - Parallel & Right Angle Gearboxes

Supplier: Brevini Australia

POSIRED 2 Parallel Shaft and Right Angle Gearboxes, POSIRED N Parallel axis Lifting gear with large axle bases, POSIRED D Right Angle Gearboxes, POSIRED TS Double Shaft Gear, POSIRED R Gear for agitators, aerators, and fan

CONTACT THIS SUPPLIER TO FIND OUT MORE

Parallel & Right Angle Gearboxes

  • POSIRED 2 Parallel Shaft and Right Angle Gearboxes
    • In this product range the demand for a gear program rich in variants but with a minimum number of parts have been fulfilled.
    • High degree of standardisation and consistent modularity ensures availability with short delivery time.
    • A large number of standard options with a great variety of versions guarantee optimal adaptation in almost all areas of mechanical and system construction.
    • An extensive range of accessories increases the adaptation capacity of this gear to various requirements.
    • As a standard, fans, cooling coil, external oil cooler, heating rods, torque supports, engine consoles, sub-constructions and operation monitoring systems are available.
    • Technical Data
      Torque (T2max): up to 800.000 Nm
      Transmission Ratio: up to 710 iN
      Power Rating: up to 4.400 kW

  • POSIRED N Parallel axis Lifting gear with large axle bases
    • Lifting gears in which the cable drum and driving motor are arranged in parallel require a step-down gear with a correspondingly large axle base.
    • The lifting gear gears in the POSIRED N series are designed for this application and ideally bridge the given distance between the motor and cable drum.
    • The development of this series was based on widespread experience in crane engineering.
    • The demands of this branch were largely taken into account in this gear concept.
      The accessories needed for this application such as elastic clutches, barrel clutches, brakes, substructures, etc. are available and can be supplied with the gear.
    • Technical Data
      Torque (T2max): up to 500.000 Nm
      Transmission Ratio: up to 500 iN

  • POSIRED D Right Angle Gearboxes
    • This universal and compact gearmotor is based on a modular system with high output torque with a monobloc housing integrating a motor bell housing.
    • A large number of variants are available for each size.
    • The opportunity to mount brake motor makes this gearmotor most suited for traverse movements in cranes or other large mobile applications.
    • Main characteristics:
      • Horizontal or upright fitting position
      • Torque reaction arm integrated in the casing
      • 6 frame sizes rated according to a modular system
      • Use of standard components from the Posired 2 program
      • Advantageous prices due to a low manufacturing proportion
    • Technical Data
      Torque (T2max): up to 25.000 Nm
      Transmission Ratio: up to 112 iN
      Power Rating: up to 173 kW

  • POSIRED TS Double Shaft Gear
    • Fields of application for this series of gear are rolling mills, profiling plants, crushers, double-shaft mixers, kneaders, compactors and presses.
    • These systems require two contra-rotating drives, such as is provided by the Posired TS gear.
    • The various designs, installation possibilities and optional accessories of the basic range of POSIRED 2 gears can also be used for the double shaft gear POSIRED TS.
    • Technical Data
      Torque (T2max): up to 110.000 Nm
      Transmission Ratio: up to 140 iN
      Centre distance (a): up to 656 mm
  • POSIRED R Gear for agitators, aerators, fan
    • Our mixer gears are primarily used in chemicals industry, though they are also needed in other applications with a vertical shaft position such as surface aerator, sifter, hydrostations and discharge facilities.
    • The bearing base of the drive shaft is ideally suited to absorb the reaction forces of the mixer; the housings are of monobloc design and thus ensure a high rigidity with small installation space.
    • The helical gearing is case hardened, noise-optimised and ground with a profile correction for an optimum load-bearing performance.
    • The wide variety of optional accessories for the basic range of POSIRED 2 devices can also be used for the POSIRED R mixer gear.
    • Technical Data
      Torque (T2max): up to 47.000 Nm
      Transmission Ratio: up to 140 iN

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more