ISOLOK® Series SAE Large Capacity Sampler captures a volume of approximately 100 cc per cycle. Particle sizes up to 3/4" (19 mm) are accommodated without shearing or degrading the sampled material. An auxiliary top body port enables air ejection of non-free flowing materials.
An air cylinder extends a single plunger into the process material, then immediately withdraws, carrying a fixed amount of sample trapped in an annular ring between plunger seals. Process or flow ports are always closed, preventing leaks or product loss. There are no tubes or passages to become clogged. The gravity-discharged sample is transferred directly to a closed container. Sample integrity is maintained while contamination of personnel or facility is eliminated.
ISOLOK® Series SAE Samplers can be used for composite, batch or analysis sampling techniques. Composite sampling is accomplished by obtaining a series of precisely measured material samples at set intervals or adjusted in response to product flow. Samples can be collected in common or individual containers. Batch or analysis sampling in response to immediate need or on-line process control interface is facilitated using single or rapid-cycling material withdrawal.
A complete line of programmable automatic controls is available for use in general purpose as well as hazardous environments.
- Sample dry and flowable products (powders, pellets, grains, etc.)
- Captures up to 18cc per cycle
- Handles particles up to 9mm
- Rugged 316 stainless construction
- Flush or extended nose design for packed or free flowing materials
- Batch or composite samples
- EDPM, polyurethane or other job-matched seals
- Models for drop chutes or bins