Radial Arm Saw Suppliers in Sydney & Brisbane

A radial arm saw is a type of saw that has a circular blade mounted on a horizontal arm that can be moved up and down and rotated around a vertical axis. It is primarily used for making crosscuts, ripping, and bevel cuts in wood and other materials. Unlike other types of saws, such as table saws and miter saws, the blade of a radial arm saw is mounted above the workpiece, allowing for greater visibility and control. Additionally, the arm can be extended to make longer cuts, and the saw can be tilted to make angled cuts. However, radial arm saws are generally larger and more expensive than other types of saws, and they require more space to operate.

When buying a radial arm saw, there are several key features to look for:

• Blade size: The blade size determines the maximum depth of cut. Choose a blade size that is appropriate for the type of work you will be doing.
• Motor power: The motor power determines the cutting speed and the ability to handle tough materials. Choose a motor with sufficient power for your needs.
• Arm length: The arm length determines the maximum width of cut. Choose an arm length that is appropriate for the size of the materials you will be cutting.
• Bevel capacity: The bevel capacity determines the angle at which the saw can cut. Choose a saw with a bevel capacity that meets your needs.
• Dust collection: Look for a saw with a dust collection system to keep your work area clean and safe.
• Safety features: Look for a saw with safety features such as blade guards, emergency stop buttons, and anti-kickback devices.

Brand reputation: Choose a reputable brand with a good track record for quality and customer service.

However, based on historical data and online marketplaces, the average price range for a radial arm saw in Australia can vary from AUD 500 to AUD 3000 or more, depending on the brand, model, and features. It is always recommended to do thorough research and compare prices before making a purchase.

DeWalt

• Makita
• Bosch
• Metabo
• Jet
• Delta
• Powermatic
• Ryobi
• Craftsman

Hitachi

When using a radial arm saw, there are several safety considerations to keep in mind:

• Eye and ear protection: Always wear safety glasses or goggles and ear protection to protect your eyes and ears from flying debris and loud noise.
• Blade guard: Make sure the blade guard is in place and functioning properly. The guard should cover the blade completely and retract automatically when the saw is in use.
• Blade selection: Use the appropriate blade for the material you are cutting. A dull or damaged blade can cause kickback or binding, which can be dangerous.
• Blade height: Adjust the blade height so that it is just above the material being cut. This will reduce the risk of kickback and binding.
• Blade alignment: Make sure the blade is aligned properly with the fence and miter gauge. Misaligned blades can cause binding and kickback.
• Material support: Use adequate material support, such as a table or stand, to prevent the material from tipping or falling during the cut.
• Hand placement: Keep your hands away from the blade and out of the path of the cut. Use push sticks or other devices to guide the material through the cut.
• Power source: Make sure the saw is properly grounded and the power source is in good condition. Do not use extension cords that are damaged or too small for the saw's power requirements.

Maintenance: Keep the saw clean and well-maintained. Check the blade for damage or wear regularly and replace as needed.

Yes, a radial arm saw can be used for both crosscutting and ripping. However, it is important to use the appropriate blade and make adjustments to the saw's settings for each type of cut. Crosscutting typically requires a fine-toothed blade and a miter gauge, while ripping requires a coarse-toothed blade and a fence.

The maximum depth of cut for a radial arm saw depends on the size and model of the saw. However, most radial arm saws have a maximum depth of cut of around 3 inches. It is important to consult the manufacturer's instructions and specifications for the specific saw being used to determine the maximum depth of cut.

To maintain and care for your radial arm saw, you should follow these steps:

• Keep the saw clean and free of debris. Use a brush or vacuum to remove sawdust and other debris from the saw's surface and moving parts.
• Check the blade regularly for damage or wear. Replace the blade if it is dull or damaged.
• Lubricate the moving parts of the saw regularly. Use a light machine oil or silicone spray to lubricate the saw's bearings, gears, and other moving parts.
• Check the alignment of the saw blade and fence. Make sure the blade is perpendicular to the table and the fence is parallel to the blade.
• Adjust the saw's depth and angle settings as needed. Use the saw's adjustment knobs or levers to set the blade depth and angle for different types of cuts.
• Use the proper safety equipment when operating the saw. Wear eye and ear protection, and keep your hands and fingers away from the blade.

Store the saw in a dry, clean place when not in use. Cover the saw with a dust cover or tarp to protect it from dust and moisture.

There are several accessories available for a radial arm saw, including:

• Dado blade set: A dado blade set is used to make grooves or dadoes in wood.
• Miter gauge: A miter gauge is used to make angled cuts in wood.
• Rip fence: A rip fence is used to make straight cuts in wood.
• Dust collection system: A dust collection system helps to keep the work area clean and free of sawdust.
• Blade guard: A blade guard is used to protect the operator from the saw blade.
• Outfeed support: An outfeed support is used to support the wood as it exits the saw.
• Hold-down clamp: A hold-down clamp is used to secure the wood to the table while cutting.
• Laser guide: A laser guide is used to help the operator make accurate cuts.
• Digital readout: A digital readout is used to display the angle and height of the saw blade.

Workbench: A workbench is used to support the saw and provide a workspace for the operator.

Yes, it is recommended to have prior experience with using power tools before using a radial arm saw. This is because a radial arm saw is a powerful tool that can be dangerous if not used properly. It is important to understand how to operate the saw safely and effectively, as well as how to maintain and care for it. Prior experience with power tools can help ensure that the user is familiar with the basic safety precautions and techniques necessary for using a radial arm saw.