The CableMaster 500 is a high quality cable tester and fault locator. The CableMaster 500 is designed to test and measure lengths of all common low voltage cabling found in today’s network, video or telephone systems.
It also maps the locations of cable ends by sending a tone on the cable that can be traced with a tone tracer or by blinking the LED on the port jack. The CableMaster 500 has a large, bright backlit LCD display and glow-in-the-dark buttons to directly access each function. The remote stores inside the main unit for ease of cable testing.
Tests voice (6 wire), data (8 wire) and video (coax)
Easy to read, extra large 7-segment LCD screen with large icons
Tone generation over voice, data and video cables, with 4 different tones
Measures length of entire cable and individual wire pairs
RJ (Voice & Data) master remote stores in bottom of case
Maps 20 locations at one time
Tests and indicates pins with shorts, opens, reversals, miswires and split pairs
Displays “Pass” icon for correctly wired T568A/B and crossover/uplink
Displays “Pass” icon for correctly wired 6-pin telephone plus “Rev” for reversepinned
Low power consumption for long battery life
Built-in LED Flashlight
Easy-to-read Large Backlit LCD Display
Audible Beep for Additional Feedback
Ergonomic Slip-resistant Side Grips
Self-stored Master Remote – Squeeze remote at finger grip openings in main unit to remove
RJ45, RJ12 and F-Jack on Main Unit and Remote
Ti2 Pty Ltd | Industrial & Process automation, Engineering, IT
Ti2 Pty Ltd offer a wide range of quality industrial automotive, automation, and information products and services. Using genuine open standards and technologies for industrial solutions we are able to ...