Australia's #1 industrial directory for equipment & suppliers

Cattle Yards | Gates

Supplier: M & M Stockyards & Steel Fabrication

M & M Stockyards manufacture many different styles of gates, with various hinges and catches

CONTACT THIS SUPPLIER TO FIND OUT MORE

Double Hinge Gates and Frames - this gate is our most popular type of gate. It has a unique hinging system that allows the gate to swing freely through the frame in both directions, practically 360 degrees. This type of hinging system also allows the gate to lay flush on the panel it is connected to, out of the way of stock and handlers.

Single Hinge Gates and Frames - will open 90 degrees in both directions or the gate can be manufactured to hit up on the frame and swing one direction 180 degrees.

Chain Catch - In our chain catch system we use 14mm round bar with a reinforced spacer system so the chain is secure but can be easily released. We use this catch on the majority of our gates because it is fast and it has no protruding parts like a bolt system can have. Also, a gate with a chain catch can be secured even if it is not quite shut.

Single Hinge Gates with Spring Slam Catches - This gate is manufactured in a heavy duty frame that has corner bracing to ensure the slam catch is supported. We have two different styles of slam catch gates. The positioning of the gate within a yard, will dictate which gate is suitable.

Slide Gates - This fully reversible gate is built using heavy duty materials with 115 x 42 rails in the gate. The gate has a pull shut mechanism so you do not have to reach through the frame to shut the gate.

Double Hinge Lock Up Gates - are included in all our designs with a drafting pound. This gate will swing through the frame or the operator can engage our unique locking mechanism and convert the gate to hit up on either side of the frame. This gate is a very handy gate to have in a drafting situation.

3 or 4 Way Drafting Gates - These gates can be included in the race section and are either 2 or 3 gates connected overhead. The gate hinges have tension adjustments to tighten the hinge to hold the gate in the desired position. The gates are hinged on a heavy-duty frame and come complete with two heavy-duty drop bolts. Each gate has a section of poly belting that will swing past the head of the beast in the crush.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more