Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids.
Delivery: up to 750 m3/h
Head: up to 100 m
Power supply: three-phase and single-phase 50 and 60 Hz
Power: 0.25 kW to 132 kW
Maximum operating pressure:
12 bar PN12 up to FH80
flanges PN16 for FH100,125,150
Temperature of pumped liquid:
-20°C to +85°C (FH32 to 80)
-30°C to +120°C (FH100 to 150)
Insulation class: 155 (F)
Industrial washing equipment
Cooling and chilling
Pump body: Cast iron
Impeller: Stainless steel for sizes 32, 40, 50 and 65-125. Cast iron for remaining sizes
Adapter: Aluminium or Cast iron
Mechanical seal: Ceramic/Carbon/NBR
FHE, FHF, FHS
FHE Close-coupled with special motor shaft extension.
FHS With stub shaft and standard motor.
FHF With adapter, support, flexible coupling, base and standard motor according to EN 733 (ex DIN 24255)
Available on request:
different voltages and frequencies
special materials for the mechanical seals and gaskets
FHF with flexible coupling with spacer
version with Hydrovar frequency converter
version with bronze impeller
The e-NSC model will replace the FH series going forward.
Brown Brothers Engineers | Pressure Systems & Industrial Process Pumps
Brown Brothers Engineers was established in 1908 in New Zealand by Alfred and Phillip Brown. In the early years, the company specialised in electrical engineering and diversified into pumps after ...