Nominal flow rate of this range complies with DIN 24255 (EN733) standard.
Easy To Install Ajax E-Line pumps are ready to be installed with a minimum of preparation. The pump is mounted in a straight run of pipe which simplifies pipe work and saves space.
Easy To Service The Ajax Inline Pump has the Back Pull-Out “B.P.O.” feature which allows for removal of the motor and pump without disturbing the pipe work.
Motor Options for Centrifugal Pumps - Ajax E-Line Electric Motors are standard TEFC, 3 phase squirrel cage design in accordance with I.E.C./DIN output and dimensional standards with class F insulation and IP55 protection. Special motors are available for different voltages and according to clients requirements.
General Operating Parameters for Centrifugal Pumps - Ajax E-Line
Pump Sizes: 40mm to 300mm
Capacities: up to 300L/s
Head: up to 155m
Maximum Operating Pressure: 1600kPa
Maximum Hydrostatic Test Pressure: 2100kPa
Maximum Suction Pressure (2900rpm): 700kPa
Standard Temperature Mechanical Seal: -10°C to 80°C
For more information on Centrifugal Pumps - Ajax E-Line, please click here.
KSB Australia | Pumps, Valves, Systems & Services
KSB Australia is one of the leading suppliers of Pumps, Valves & Systems for the Water, Waste Water, Mining, Building Services, Energy, Oil & Gas & Industry sectors in Australia. It is part of worldwide KSB Group which is one of the leading suppliers of Pumps, Valves & Systems in the world. Formerly known as Ajax Pumps, KSB Australia was established in 1939 in Australia and has been serving the Australian and worldwide market ever since. .
Products and services at a glance:
Water & Wate Water
Pumps, Valves and mixers, as well as associated control and drive systems for municipal and industrial appplications.
SLurry pumps for use in the mining industry and on suction hopper dredges.
Industry and process engineering
Pumps and valves, associated control and drive systems.
Pumps and valves, associated control and drive systems for use in power staions and district heating systems.
Pumps and valves, associated control and drive systems for domestic water supply, drainage, heating and air conditioning.
Design and enginnering of fluid transfer systems and sub systems, with a major focus on water and waste water.
Installation, commissioning, start up, inspection, servicing, maintenance and repair of pumps, valves and related sustems, modular concepts for complete systems.