Type 8232 offer a range of three models: • the “Trace” chlorine sensor (zero-chlorine) with three electrodes is suitable for the measuring of chlorine at very low concentrations. The membrane of this sensor is protected against biofouling. The sensor works in water without chlorine up to four weeks. It is available with a voltage output on a four-pin fixed connector. • the chlorine sensor with three electrodes has a sensor with greatly reduced pH-dependency.
This model delivers a current output on a M12 connector and is designed to be used in a swimming pool, drinking or sea water. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm). • the chlorine sensor with two electrodes delivers a current output on a M12 connector. It is designed to be used using in a swimming pool, drinking or process water. The fluid to be measured must not contain any surfactants or abrasive particles and its pH value must be at a constant level. The fluid must contain a minimum chlorine concentration (≥ 0.1 ppm).
Chlorine sensor “Trace” with three electrodes for measuring at low concentration
Chlorine sensor with three electrodes and greatly reduced pH dependency
Chlorine sensor with two electrodes for standard applications at constant pH
Burkert Fluid Control Systems | Fluid Control and Automation Solutions
Since 1980, Bürkert has shown its commitment to bringing the highest level of quality and service to Australia and New Zealand. Bürkert maintains a highly trained staff that is on hand to answer technical needs - from one-off basic solenoid valves, to comprehensive networked systems.
Bürkert Australia HQ is located in Sydney, with large branch offices in all states, including some regional centres.
Bürkert in New Zealand has its headquarters in Auckland and maintains presence throughout both the North and South Islands, serving Trans-Tasman customers.
Wherever you are, Bürkert will be there to ensure you get the very best technical solution.
Bürkert. We make ideas flow.