Cutterbar Headers for CR and CX Combines
72C Rigid Cutterbar Header
The 72C rigid cutterbar header is available in 20-, 25- and 30-foot widths. The smallest model is equipped with a single-knife drive, while the two larger models feature twin-knife drives.
74C Flexible Cutterbar Header
The 74C flexible cutterbar header is available in three cutting widths, and each is equipped with a twin-knife drive. The 74C gives you a choice of 1 1/2-inch knives and guards (twin cut) or 3-inch knives and guards.
It also provides up to 4 1/2 inches of float and closely follows the ground contour to pick up low-growing crops. And, with the 74C, the New Holland Terrain Tracer header flotation system is standard equipment.
Both the 72C and 74C headers include these features:
- Large 26-inch diameter, full-finger auger allows smooth, even feeding of crop to the feeder.
- Choice of reels and crop dividers lets you adapt these headers to a wide variety of crop conditions.
- Hydraulic fore and aft reel adjustment provides precise feeding in all crop conditions.
Terrain Tracer takes the bounce out of rough spots and helps you get all of the grain. It automatically tilts the header laterally to follow the ground contour and raises the head vertically.
If the combine dips into a gully one wheel at a time or stumbles across a deep tire track, the header remains on the ground to get all the grain. Terrain Tracer is offered for all direct cut, auger-type headers and corn heads.
To Know More about Combine Harvesters / Cutterbar Headers Please click here