ComEth4000a supports full-wire speed L2 bridging and L3 routing with L2-L4 advanced traffic classification,filtering and prioritization. The eight level of queue priority combined with QoS policy make easier to tune the delay-sensitive in critical applications.
ComEth4000a ports are compatible both with VME or cPCI system. It is designed to optimize the integration of Gigabit switched network. Twelve front Giga channels are
implemented on the one slot version, twelve additional ports are available on the two slots configuration.
According to the configuration, ComEth4000a provides a combination of 10/100/1000BT or Fiber ports. Several types of optical interface are available 1000SX, 1000LX, WDM
Auto-crossover, auto-polarity, auto-negotiation and automatic MAC address management make ComEth4000a a true Plug&Play switch.
The Marvell Virtual Cable tester allows a remote identification of potential cable mal-functions as excessive pair skew, cable opens, impedance mismatch...
This switch is fully compatible with ComEth40x0a range
The ComEth4000a can be monitored from a browser, a CLI or SNMP. The whole system can be easily managed and handled. A comprehensive Built-in test makes easier
the maintenance of this switch. Many additional functions are provided on this full-managed version :
Configuration of all the PHY and switch parameters: ports monitoring, static MAC address, QoS policy, Multicast and VLAN control, STP/RSTP protocols,
MAC security Monitoring of all statistical counters and an extensive list of RMON counters.
The Switchware software provides layer 3 functions, allowing local IP forwarding (IPv4/IPv6), static and dynamic protocols (RIP, OSPF) routing, proxy-ARP and DHCP-relay.
These L3 functions are managed through a CLI interface. The IP routing and the L3 protocols are carried out by the processor and the forwarding by a full-speed L3 engine
router running a the line-wired speed.
ComEth4000a can be used as an open switching platform to implement specific functionalities.
Its 6U form factor allows the ComEth4000a to be integrated in VME 32 or 64x, cPCI6U or stand-alone applications. ComEth4000a is available from standard to rugged
12 or 24 10/100/1000 Ethernetports with a full-wire speed switching capacity of up to 37Mpps
Giga Ethernet switches with 10 Giga ports (XAUI)12 or 24 10/100/1000 Ethernetports with a full-wire speed switching capacity of up to 37Mpps
- 16 * 10/100/1000Mbs (FB)
- 2 * 10GBase-CX4 (FB)
- 125 Mpps 10GE Switch Full-wire speed
- Fully managed L2 L3 UC/MC Engine 12x 10/100/1000BT
- 20x 10/100/1000BT
- 20x 10/100/1000BT and 4x 1000BT or 1000SX