For personal protection, the new MiniWarn has:
- a high-tech ergonomic design
- a compact size and light weight
- a vast sensor selection from one of the world's best sensor manufacturers
- the latest in solid state technology and microprocessors
- full Multiwarn capabilities including a data logger
The MiniWarn makes an ideal bodyguard during inspections, maintenance, or as a full-time personal monitor. Every MiniWarn has 4 measurement channels, allowing the simultaneous measurement of 1-4 gases.
As a standard feature, every MiniWarn is equipped with an infrared interface to a PC. The simple three-button key pad makes operation easy and uncomplicated. The high contrast LCD display, with a dirt and scratch resistant protective cover, insures good readability.
An easily attachable auto-on external pump which is powered by the instrument battery is available as an accessory. For reading and displaying data from the "MiniWarn E" data logger, we offer the "GasVision" software package.
MiniWarn has four measurement channels. These channels may be equipped with one catalytic, and at most three electrochemical sensors. The catalytic Ex Sensor consists of two different measurement technologies in one housing and can measure % LEL as well as Vol. % unambiguously over the entire 0 to 100 Vol. % concentration range.*)
The electrochemical XS sensors utilize second generation "Smart" technology. They are easily installed by the user and ready to use after warming up . The new XS sensor generation requires less calibration because of improved sensor life and reduced long-time drift.
Additionally, they may be equipped with filters to minimize cross sensitivity problems. Currently more than 25 Dräger- Sensor® XS sensors are available for the measurement of more than 40 gases and vapors. The well-defined cross sensitivities of these sensors considerably increase the number of gas measurement possibilities.
- CO 0-2000 ppm
- H2S 0-100 ppm
- CH4 0 % LEL Vol %
- O2 0-25 Vol.-%