Home Trusted by 500,000+ buyers

Control System -- WinPAC-8000

Supplier: ICP DAS Co., Ltd

Compare to the WinCon-8000, the WinPAC-8000 adds many reliability features, such as dual LAN, redundant power input, dual battery backup SRAM, etc. It gives you all of the best features of both traditional PLCs and Windows capable PCs.

Price Guide: POA

WinPAC-8000 is the second generation PAC of ICP DAS. It equips a PXA270 CPU (520MHz) running a Windows CE.NET 5.0 operating system, variant connectivities (VGA, USB, Ethernet, RS-232/485) and 1/4/8 slots for high performance parallel I/O modules (high profile I-8K series) and serial-type I/O modules (high profile I-87K I/O modules). 

Its operating system,Windows CE 5.0, has many advantages, including hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level, achievable deterministic control and low cost. Using Windows CE.Net 5.0 in the WinPAC-8000 gives it the ability to run PC-based Control software such as Visual Basic.NET, Visual C#, Embedded Visual C++, SCADA software, Soft PLC, etc. 

The WinPAC-8000 Software features :

  • Windows CE.Net 5.0
  • Remote Maintenance via FTP Server and VCEP Software
  • Built-In OPC Server(Quicker)
  • Rich Software Solution
  • Upgrading Applications from WinCon to WinPAC just Copy and Play

The WinPAC-8000 Hardware features:

  • Powerful CPU Module
  • Built-in VGA Port
  • 64-bit Hardware Serial Number
  • I/O Module Hot Swap Ability (for High Profile I-87K Modules Only)
  • Rich I/O Expansion Ability (RS-232/485, Ethernet, FRnet, CAN)
  • Built-In Flash Disk (31MB for WP-8x4x, 63MB for WP-8x3x)
  • Dual Watchdog Timer
  • Dual Battery-Backup SRAM(512KB)
  • Dual Ethernet Ports
  • Redundant Power Inputs
  • Ventilated Housing Design Allows Operation Between -25°C ~ +75°C

For more product details information:http://www.icpdas.com/products/PAC/winpac/introduction.htm

For  WinPAC series I/O Expansion information: http://www.icpdas.com/products/PAC/winpac/IO_Expansion.htm