Length up to 13700mm (45’) x 2500mm (8’ 2 ½”) wide. Front floor height is approx. 1655mm based on a 1250mm turntable height.
Fabricated ‘I’ Beam with 130mm x 12mm top and bottom flanges.
100mm x 45mm High Tensile RSJ with 25 N.B. pipe tie rail.
Option: 125mm x 65mm RSJ
100mm x 45mm RSJ
Option: Container beams to suit 1 x 40ft., 2 x 20ft., or 1 x 20ft
2.5mm Lyten sheet
York Model 2782 – 20” spider
Option: Various Axle brands and models available
Nil. (Range available)
Nil. (Range of steel spider, 10 stud steel or aluminium rims available)
York MT75 8’1” Spring Tri-axle cast steel overslung.
Option: Various spring or air suspension brands available.
50mm Jost bolt-in (D-value 190kN) with bolt-on turntable block
Air Brake Corp Tri-axle to ADR 38/02 Specifications.
Option: Road train brake kit.
Jost A400 Series mounted on drawbar
Dual through chassis type, hinged on rubber bushes
One x 1200mm lockable type with spring loaded catches
Option: Additional toolboxes may be fitted.
One x 60 litre galvanised
Option: Plastic water tank available
Pressed aluminium tread plate guards with mudflaps in front of suspension. Long mudflap hung off bumper bar at rear of suspension.
Double ‘A’ Frame drawbar with pivoting skidplate
GATES: 1525mm (5’) high twin bow High Tensile RHS. Removable front load rack
Option: 1675mm (5’6”) or 1830mm (6’) high gates, tarp bow rack available
Three-way opening, half sheeted with centre grain door and chute
HOIST: Hyva 50 tonne – 5 stage. Two purpose built 5 stage starter rams
Lights (wired in conduit), Reflectors, and Rear Marker Plates conforming to all relevant Australian Design Rules.
Option: LED Lights – Side and Rear
Trailer is deburred and fully sandblasted prior to painting with Etch Primer undercoat and PPG 2K finish coat to Fleet or Customer colours (with scrollwork to suit)
Option: Various finishes are available including Metallics, Clear-Over-Base, and Chemical resistant paints
Gate Rack, Winches (clip-on or track type), Winch Track, Single Draw Arms, Spray Suppressant Mudguards and Flaps, Hubodometer, Ringfeeder (bracket only or complete), LargeToolbox (with or without shelf), Spare Tyre Clamp, Vibrator, Hydraulic Power Pack