Conveyor idler Link-belt(r) series are available in 450mm to 1500mm belt width, 20, 35 and 45 degree troughed, training, impact and return idlers.
The unique design of the C3000S idler ensures extended, trouble-free service life for your belt conveyor equipment.
The C3000S rollers and frames are protected from corrosion by a polymeric powder coating (Corvel Gray) which is applied following a five-stage phosphate cleaning operation.
The finish is then baked on at high temperatures to provide resistance to abrasive elements.
Assembly hardware is electro zinc plated to ensure extended service. The Series C3000S rollers, available in both 127mm and 152mm diameters, feature an exclusive, full-length center tube which is assembled to precision die formed heads that are recessed into hot rolled mechanical shells.
The entire unit is then continuously welded robotically, thus ensuring an integral, airtight unit in which contaminants and corrosion cannot enter. This unrivaled center tube design guarantees perfect shaft/bearing alignment.
Bearing life is increased by using solid, cold drawn steel shafts to minimize deflection and increase load ratings.
The premium quality Delrin triple horizontal labyrinth outer seal protects the precision tapered roller bearings in several ways. The outer deflector cap (flinger) features a 90 degree contoured lip to deflect material away from the roll ends.
Triple horizontal, grease filled labyrinths and Grade F1 felt contact primary seals, along with rear non-contacting seals, ensure against the ingress of performance inhibiting contaminants.
The outer adjusting nuts are zinc plated, machined steel, to minimize corrosion. The C3000 idler line features an inverted angle frame base with slotted footstraps to ensure quick, easy mounting and alignment.
The heavy-duty, die-formed, steel end brackets are contoured for generous clearance to safeguard against spilled materials becoming jammed and impeding the rotation of the rollers.
All idler frames and rolls are welded in accordance with AWS D1.1 specifications for structural welds.
Series C3000S maintanence free conveyor idlers boast load ratings which exceed CEMA requirements.
This rugged trough belt idler range is well suited for continuous material handling operations moving massive volumes of tough, abrasive materials such as coal, iron ore, copper, rock products, chemicals and forestry products.
To Know More about Series C3000S Maintenance Free Idlers Please click here