MPL - Copper to Fibre Optic Ethernet Media Converter

Copper to Fibre Optic Ethernet Media Converter

Features

• Triple speed (10/100/1000Mbit) copper Ethernet interface
• Automatic detection and initializing of the SFP module (100Mbit-FX, 1000Mbit-X)
• Single wide power supply input (5 to 36V)
• Different mechanical versions
• Extended temp. option -40°C to +85°C
• Configurable Flow Control, Link Loss Forwarding and Link Speed Forwarding
• Jumbo Frame supported
• Unmanaged switch (TX2FX-13/TX2FX-14 only)

These features make the TX2FX ideally suited for any industrial application. Through the low power consumption, robust, and flexible design, the product can be used in any embedded system. Whether it is being used in a rugged, hot, or other extreme environment, the TX2FX helps to expand your network distances!

 

Technical Features

Board Key Data
Copper Port	on RJ45 (10/100/1000Mbit) supports auto crossover, polarity correction
Fiber Optic Port	over standard SFP transceivers, supports single- and multi-mode, 100Mbit-FX or 1000Mbit-X
Status LEDs	2 LEDs for each RJ45 port / 2 LEDs for each SFP port
Physical / Power
Size (L x W x H)	75.7 x 50.0 x 16.0 mm
Power	5VDC to 36VDC
Power consumpt.	1.8W 1Gbit copper/optical link
Environment
Temp. Range	Standard -20°C to 60°C, optional -40°C to 85°C
Humidity	5 - 95% non condensing, optional coating available

Accessories

SFP (optical transceiver) in stock
Optional: MPL offers following SFP modules (others on request)
SFP-1X	1Gb SFP 850nm optical transceiver, 1000BASE-SX, multi mode, up to 500m, with standard LC connector, case temp. -40 to +85°C
SFP-2X	1Gb SFP 1310nm optical transceiver, 1000BASE-LX, single mode, up to 10km, with standard LC connector, case temp. -40 to +85°C
SFP-3X	100Mb SFP 1310nm optical transceiver, 100BASE-FX, multi mode, up to 2km, with standard LC connector, case temp. -40 to +85°C
or any other standard SFP in accordance to MSA & Ethernet compatible

Read more...

To contact Ti2 Pty Ltd about MPL Copper to Fibre Optic Ethernet Media Converter use Get A Quote.

Features

• Triple speed (10/100/1000Mbit) copper Ethernet interface
• Automatic detection and initializing of the SFP module (100Mbit-FX, 1000Mbit-X)
• Single wide power supply input (5 to 36V)
• Different mechanical versions
• Extended temp. option -40°C to +85°C
• Configurable Flow Control, Link Loss Forwarding and Link Speed Forwarding
• Jumbo Frame supported
• Unmanaged switch (TX2FX-13/TX2FX-14 only)

These features make the TX2FX ideally suited for any industrial application. Through the low power consumption, robust, and flexible design, the product can be used in any embedded system. Whether it is being used in a rugged, hot, or other extreme environment, the TX2FX helps to expand your network distances!

 

Technical Features

Board Key Data
Copper Port	on RJ45 (10/100/1000Mbit) supports auto crossover, polarity correction
Fiber Optic Port	over standard SFP transceivers, supports single- and multi-mode, 100Mbit-FX or 1000Mbit-X
Status LEDs	2 LEDs for each RJ45 port / 2 LEDs for each SFP port
Physical / Power
Size (L x W x H)	75.7 x 50.0 x 16.0 mm
Power	5VDC to 36VDC
Power consumpt.	1.8W 1Gbit copper/optical link
Environment
Temp. Range	Standard -20°C to 60°C, optional -40°C to 85°C
Humidity	5 - 95% non condensing, optional coating available

Accessories

SFP (optical transceiver) in stock
Optional: MPL offers following SFP modules (others on request)
SFP-1X	1Gb SFP 850nm optical transceiver, 1000BASE-SX, multi mode, up to 500m, with standard LC connector, case temp. -40 to +85°C
SFP-2X	1Gb SFP 1310nm optical transceiver, 1000BASE-LX, single mode, up to 10km, with standard LC connector, case temp. -40 to +85°C
SFP-3X	100Mb SFP 1310nm optical transceiver, 100BASE-FX, multi mode, up to 2km, with standard LC connector, case temp. -40 to +85°C
or any other standard SFP in accordance to MSA & Ethernet compatible

Read less...

To contact Ti2 Pty Ltd about MPL Copper to Fibre Optic Ethernet Media Converter use Get A Quote.