PULS - CPS20 Series 1 Phase DIN Rail PSU 24V 20A$557

RS Article: 7697424

The PULS Dimensions C- Line series single output DIN-rail switch mode power supply has an output current rating of 20A at 24VDC. It has a single-phase input voltage ranging between 100VAC and 240VAC with active power factor correction(PFC). These are cost optimised power supplies specifically designed with uncompromised quality and reliability for high-performance. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The output current is 20A at an output voltage of 24VDC. It has high immunity to power surges as well as low electromagnetic emission. High immunity makes it suitable for almost every situation.

Note:

• Power de-rating @ +60 to +70°C.

Features and Benefits:

• 20% output power reserves up to 45°C continuously allowed
• Cost effective
• DC-OK relay contact
• Efficiency up to 94%
• Excellent partial load efficiency
• Large screw terminals
• Minimal inrush current surge
• Operation temperature ranging between -25°C and 70°C
• Power rating is 480W
• Ripple factor and noise is 50mV
• Safe HiccupPLUS overload mode
• Slim design
• Wide range auto select input

Need more information? Message RS Components via the form, or call and say you found them on IndustrySearch so they can best assist you.

RS Article: 7697424

The PULS Dimensions C- Line series single output DIN-rail switch mode power supply has an output current rating of 20A at 24VDC. It has a single-phase input voltage ranging between 100VAC and 240VAC with active power factor correction(PFC). These are cost optimised power supplies specifically designed with uncompromised quality and reliability for high-performance. This power supply has a specified life expectancy of the electrolytic capacitor of 50,000 hours. The output current is 20A at an output voltage of 24VDC. It has high immunity to power surges as well as low electromagnetic emission. High immunity makes it suitable for almost every situation.

Note:

• Power de-rating @ +60 to +70°C.

Features and Benefits:

• 20% output power reserves up to 45°C continuously allowed
• Cost effective
• DC-OK relay contact
• Efficiency up to 94%
• Excellent partial load efficiency
• Large screw terminals
• Minimal inrush current surge
• Operation temperature ranging between -25°C and 70°C
• Power rating is 480W
• Ripple factor and noise is 50mV
• Safe HiccupPLUS overload mode
• Slim design
• Wide range auto select input

Read less...

Need more information? Message RS Components via the form, or call and say you found them on IndustrySearch so they can best assist you.