Sika - Digital Reference Pressure Gauge Type J by Ross Brown Sales

Example applications include:

• Continuous or temporary checking of a wide variety of system pressures
• Air density measurement in building shells for the detection and elimination of problem areas and avoiding structural damage
• Monitoring the degree of soiling of filter units in ventilation or air conditioning systems
• recording pressure drops for the determination of leakage rates in leak tests
• measurement of barometric air pressure for the determination of weather conditions
• reference pressure gauge for calibration tasks

Main Features:

• programmable resolution, digital filter and baud rate
• zero and peak (positive and negative) functions
• USB serial output
• data logger
• backlight
• measure of temperature
• key block function
• analog pressure indication always active (bar graph)

Technical data:

• Pressure range: between 0...500 mbar
• Accuracy (full scale): Max. 0.1%
• Selectable units: bar, mbar, hPa, kPa, MPa, PSI, mmHg, inHg, cmH₂O, mH₂O, and kg/cm²

Analogue output
An electrical output signal enables remote display on a control console or in a control room as well as the connection of external recorders and indicating instruments.

PC connection and software
Processes can be readily monitored and analysed using the recorded and visualised measurements and the functionality of the data logger can be fully managed from the PC. The datalogger can store up to 60,000 measurement points (30,000 if also the temperature is stored) in steps ranging from 1s to 10 hours. Data stored during the last data logging are permanently saved in non-volatile memory within the gauge so that the measures will always be accessible until the creation of a new cycle of measurement.