Use this stormwater drain filter to prevent solids, silt and hydrocarbons entering waterways via stormwater drains.
- The stormwater drain filter is placed below the grate to prevent damage in high traffic areas.
- Filter (sediment trap) is made from heavy duty, UV-stabilised 200micron geotextile fabric.
- An oil and fuel absorbent pillow is inserted into the trap to collect hydrocarbons as they pass through. The pillow will absorb approximately 14 litres of oil.
- Excess flow points avoid blockage during periods of high rainfall.
- To install, place the stormwater drain filter into drain and cut off excess fabric leaving a healthy border. Excess fabric can also be folded over the grate. Alternatively, cable ties can be used to secure the drain warden to the grate to prevent it from falling into the drain when grate is lifted.
- Drain should be no larger than 1m square.
- Drain filter should be checked for silt and debris after rainfall.
- To replace the absorbent pillow, use Oil & Fuel Pillow 58 x 37cm (PPFO).
This drain warden stormwater drain filter is also available without the oil and fuel absorbent pillow.
Stormwater drain filters are a simple and inexpensive spill response tool, helping you avoid costly fines associated with unauthorised discharge violations.
Shipping weight: 1 kg
Dimensions: 120 x 120 cm
Australian Made and Owned