Backlash occurs when the motor driving an actuator reverses its load direction. Since there is a gap between the lifting screw and the worm gear threads detrimental screw movement may occur.
When the actuator is under load, the lifting screws threads are supported by the worm gears threads. The anti-backlash nut, being pinned by to the worm gear and being adjusted downwards by the shell cap, forces the bottom thread surfaces against the upper thread surfaces of the lifting screw.
Thus backlash between the lifting screw and worm gear threads is reduced to a minimum.
- The Duff-Norton Mechanical Actuator | 316 Stainless Steel | Anti-backlash features a separate anti-backlash nut and reduces actuator backlash to less than 1 thousandths
- Available with either 316SS or 17-4PH worm
- Anti-backlash nuts reduce worm gear wear
- Anti-backlash nuts act as additional load safety devices when the worm gear has become worn
Available in Imperial sizes