RT40 Dust Suppressant For spray nozzle systems
Rt40 Dust Suppressant has been developed to improve the dust suppression performance of conveyor belt and transfer point spray nozzle systems.
The implementation of RT40 Dust Suppressant should include the evaluation of the total system's requirements and if required the changing of nozzle sizes and positioning to ensure optimum results are achieved.
Droplets generated by a spray system must be kept within a specific size range to effectively control dust.
If the droplets are too large, the smaller particles typically just 'slipstream' around them without contract, conversely, if too small, the droplets simply mix and circulate with the dust particles without wetting them.
How It Works
Almost all airborne dust is hydrophobic i.e. repels water, the water droplets, even those correctly sized, tend to bounce off the dust particles.
By adding RT40 Dust Suppressant into a water spray systems, the wetting agents break the surface tension between the particles and the water allowing the water to easily attach to the particles, then the added polymers bind the fines together which weigh them down allowing them to settle - FAST.
RT40 Dust Suppressant reduces dust levels produced on conveyor belts and transfer points by a further 60% over traditional water spray applications.
The product is manufactured to suit the individual material and water type and can be formulated to assist in raising or lowering the moisture level required in the material.
RT40 Dust Suppressant is diluted at between 1:2000 & 1:10000. As material and water types vary from project to project, dosage rates are determined individually according to site requirements.
All RST products are environmentally safe and user friendly. For further detailed information on a specific product or application please contact our Head Office.
click below for printer friendly version
To Know about RT40 Dust Suppressant Please click here