Earthmoving Equipment | Backhoe Loader SWB30-25T
However quality and performance are assured with transmission and axles imported from Italy. ROPS cabin provide safety to fit Australian Standards.
Engine
- Model Deutz TZ226B
- Type Direct injection,turbocharged,Water cooled
- Rated power 70kW
- Rated speed 2200rpm
- Rated fuel consumption 216g/Kw.h
Main Technical Specification
Loading
- Rated load 1700kg
- Operating weight 7000kg
- Max.lifting capability >2500kg
- Rated bucket capacity 1.0m3
- Max.breakout force >40kN
- Max.dump clearance 2611mm
- Dump reach 726mm
- Dump angle at any position =43.5°
- Min. turning radius
- Outside of bucket 5280mm
- Outside of rear wheel 3795mm
- Lifting time of bucket =5.1s
- Lowering time of bucket =4.9s
- Dumping time =0.9s
Digging
- Rated bucket capacity 0.3m3
- Max. digging depth 4338mm
- Max. digging force >50±10%kN
- Max. digging radius 5481mm
- Max. dumping height 3737mm
Transmission System
- Torque Converter
- Model CARRARO
- Torque ratio 2.55
- Cooling type Pressure oil circulating
Gear box
- Model CARRARO
- Type Synchromesh mechanical shift
- Gear shifts (Forward/Reverse) F4/R4
- Travelling speed(km/h)
- Forward/Reverse I 5.8/7.0
- Forward/Reverse II 10.5/12.6
- Forward/Reverse III 20.1/24.3
- Forward/Reverse IV 40.2/48.6
Axle and Tyre
- Model CARRARO (4×2)
- Type of main reducer Spiral bevel gear, single stage
- Type of final reducer Single stage planetary
- Max. tractive force 43.5KN
- Tyre size
- Front tyre 11L-16F3-12PR
- Rear tyre 19.5L-24R4-12PR
Working Equipment
- Model of oil pump JHP2050AXCC
- System pressure 21.1Mpa
- Model of loading valve ZL20DC-02
- Model of digging valve ZL30DC-07
Steering System
- Type Front wheel steering
- Model of steering pump JHP2050AXCC
- Model of redirector BZZ5-E160B FKB-3022
- Model of priority valve YXL-F160L-N7
- System pressure 14Mpa
Dimensions
- Length(with bucket on ground) 7077mm
- Width 2313mm
- Height(To the top of the cab) 2720mm
- Height(To the top of the digging pole) 3424mm
- Load Bucket width 2328mm
- Wheelbase 2155.5mm
- Tread(F/R) 1714/1557mm
- Ground clearance 355mm
Service Capacities
- Fuel tank 151L
- Engine crank case 11L
- Converter and gear box 21L
- Hydraulic system 110L
- Driving axles(F/R) 7.6/17L