Eastwood - Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536 Get latest price

Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536

Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536

Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536

2130 Recent Views In Stock

Features

• Extremely durable finish.
• Coat and cure in under an hour.
• Easy to apply.
• Quick colour changes.
• Economical.
• Versatility with 2 settings.
• Low 15,000-volt setting.
• High 25,000-volt setting for multi-coat coverage over larger areas.
• Increased powder adhesion.
• Minimal overspray.

This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven.

The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

All powder coating powders come in 454 grams packets.  

Contents

• 33278 Eastwood Dual-Voltage HotCoat Gun.
• 1/2-lb. Black Gloss Powder.
• 51558 Powder Chip Color Chart.
• 10078 Reusable Hi-Temp Silicone Plugs.
• 10027 Hi-Temp Masking Tape (1/2" x 36-yard roll).
• 43045 1-lb. Stainless Steel Hanging Wire.
• 34066 In-Line Air Filter.
• 3 Empty Powder Bottles with Screw-On Tops.
  
  

For more information or a quote please call or use the IndustrySearch email for a direct reply.

Read more...

To contact Permanent Painted Coatings about Eastwood Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536 use Get a quote.

Features

• Extremely durable finish.
• Coat and cure in under an hour.
• Easy to apply.
• Quick colour changes.
• Economical.
• Versatility with 2 settings.
• Low 15,000-volt setting.
• High 25,000-volt setting for multi-coat coverage over larger areas.
• Increased powder adhesion.
• Minimal overspray.

This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. The new Dual Voltage system gives you the capability to coat small areas using the Low 15kv setting. Or coat large areas using the High voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) and an electric oven or toaster oven.

The Dual Voltage HotCoat gun is one of the best powder coating guns on the market today. Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven).

All powder coating powders come in 454 grams packets.  

Contents

• 33278 Eastwood Dual-Voltage HotCoat Gun.
• 1/2-lb. Black Gloss Powder.
• 51558 Powder Chip Color Chart.
• 10078 Reusable Hi-Temp Silicone Plugs.
• 10027 Hi-Temp Masking Tape (1/2" x 36-yard roll).
• 43045 1-lb. Stainless Steel Hanging Wire.
• 34066 In-Line Air Filter.
• 3 Empty Powder Bottles with Screw-On Tops.
  
  

For more information or a quote please call or use the IndustrySearch email for a direct reply.

Read less...

To contact Permanent Painted Coatings about Eastwood Powder Coating Gun | Dual Voltage EW-33278 and Kit EW-11536 use Get a quote.