Electric Door Strikes | FES10 Series ANSI Footprint
The patented FES10I10M ANSI footprint electric strikes are site interchangeable to operate either as Power To Lock (P.T.L) or Power To Release (P.T.R) through reversing the positioning of the "Barbell" inside the strike's housing, simply unscrew the spring screw cap, remove the "Barbell", reverse it and re-fix the spring screw cap.
The FES10/10M can be linked to any fire alarm or access control system. It is suitable for all types of wooden, steel, PVC, aluminium or stainless door frames. The FES10/10M also have the added advantage of being dual voltage devices, 12VDC or 24VDC, simply selected by installing the appropriate connector plug supplied with the strikes.
The FES1O/1OM are supplied pre-drilled for extension lips, and come with a 5 year warranty. Independently tested, the FES10/10M Series electric strikes are the strongest of their category.
Fire tested up to 4 hours to both A.S. and B.S. standards the FES10M/FES10 "ANSI" small footprint electric door strike is a high quality robust device offering an economic security locking solution to hinged doors including fire rated door sets.
The device is "site" interchangeable power to lock (PTL) or power to release (PTR) by simply removing the end "spring screw" and reversing the locking "Barbell" (no loose pins or springs). The FES10M/FES10 is dual voltage 12/24VDC and is provided pre-drilled for extension lips.
The device can be inter-phased with building management and access control systems to control access and egress to hinged doors including fire rated models.
12vDC & 24VDC Dual Voltage
Simple power to lock/power to release interchange
Stainless steel face plate and keeper
Weather resistant (FES10 only)
5 year warranty
Compatible with door latch depth of up to 15mm
Monitoring of door latch 24V/100mA contacts (FES10M)
Low power consumption
Superior holding strength
Low temperature rise in operation
"The electric strike must be equal to the FSH model FES1OMIFES10 in all respects. It must accept voltages of either 12 or 24VDC, be fire tested to 4 hours to both Australian and British test standards, be weather resistant (FES10) and site interchangeable.Power to lock (PTL) or power to release (PTR). The strike must be provided with a 5 year warranty." In addition for FES10M, the door strike must provide door latch monitoring within the strike keeper.
Fire and Security Hardware Pty Ltd, Australia (FSH) together with Shanghai One Top Corporation have over 30 years experience in developing, manufacturing and marketing of high quality electromechanical ...