Need to know energy usage in, for instance, a domestic situation? Eltek GenII pulse transmitters and Rayleigh or Elster sub-meter systems provide a precise answer.
Cost effective and accurate kwh measurement of any number of circuits
A single transmitter can be connected to up to 8 sensors
Can be used also with other pulse output device e.g. heatmeter
Can be used with any Darca software
Can be integrated with any other GenII transmitter type
2 x pulse inputs (200Hz). Includes external DC supply input.
7 x pulse inputs (15Hz). Includes external DC supply input. With display.
8 x pulse inputs (15Hz). Battery powered only. With display.
These transmitters are supplied with 4 x LR6 AA alkaline batteries installed to provide 2 years operation if logging interval > 5 minutes. For logging intervals less than 5 mins an external DC supply (12VDC at 50mA) may be required (Transmitter types GC62 and GD67 only).
Rayleigh PRO1TE / PRO1D
1 pulse per 0.5Wh
Rayleigh conto D2
1 pulse per Wh
1600 pulses per kWh
1 pulse per 10Wh
Rayleigh pulse energy monitor can be mounted in consumer unit
Qualified electrical engineer must install.
Version available for energy import/export eg. solar generation sytems
Version with second pulse output for kvarh
WBG Wall bracket docking kit
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
All GD, GC, GL and GS series transmitters
RP250GD repeater and RC250 receiver
Connected IoT | Telemetry and Wired Data Loggers IndustrySearch Trusted Supplier
At Connected IoT, we understand that change is not always easy. Since 1995, we’ve been helping companies of all sizes respond to industry transitions in order to stay competitive. Our years of experience ...