Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm Get latest price

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm

In Stock

The magnetic brake from?? JDC?? lets you make enclosed shapes that would be impossible on traditional metal brakes. You can bend steel, aluminium, copper, and plastic, among other materials.

Open up almost unlimited possibilities!

This sheet metal brake can bend boxes or pans to almost any depth since it doesn’t rely on conventional finger depths. Runs on 240V single phase power and will work at virtually any site. 1250mm length with a maximum capacity of 16 gauge mild steel. The breakthrough open-ended design allows you to create enclosed ducts and shapes impossible to make with a traditional box and pan brake. 6 tonne magnetic power is consistent across the entire beam, allowing for crisp bends even in the middle of the brake. Scaled stroke angle control lets you deliver repeatable bends time after time. You can set up the mild steel clamping bar with straight bars (of various widths if you had very tight boxes to make) for straight bends or segmented clamping bars for box and pan applications. Blade gap adjustment on the clamping bars lets you work with sheet metal of?? different thicknesses. You can remove the bottom leaf’s bending extension for the tightest bend dimension between bends of .625”.

 

Each JDC electromagnetic sheet metal brake from???? offers:

• Open-ended design – The open top gives you the flexibility to make any kind of bend imaginable, including enclosed boxes or triangles.
• Magnet with 6 tonne of force – The powerful magnet holds the material in place so that you can clamp it within the open concept design.
• Foot pedal or push-button controls – Engage the magnet and leave your hands free to guide the material.
• Small footprint – This do-it-all machine doesn’t take up much space in your shop.

Recommended for:

• HVAC shops, industrial art shops, and general sheet metal fabrication shops.
• Making duct work, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more.

Easy, hands-free operation:

• Put a piece of material between the clamping bar to the depth required.
• Engage the powerful magnet in the bending bed with push-button control.
• Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.
• Lift the bottom bending leaf to complete the bend.

 

Specifications

Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Clamping force (with standard full-length clamp bar)	6 Tons  is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops, Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminium, coated materials, heated plastics and more.
Electrical Supply:	1 phase, 240V
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	(70°C)
Packing Dimensions	1.41m x 0.38m x 0.32m = 0.17m3
Weight	180/150kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	Lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth, since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar, and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clamp bar, a slotted clamp bar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clamp bars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

 

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

 

Read more...

To contact Aussie Car Hoist about Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm use Get a quote.

The magnetic brake from?? JDC?? lets you make enclosed shapes that would be impossible on traditional metal brakes. You can bend steel, aluminium, copper, and plastic, among other materials.

Open up almost unlimited possibilities!

This sheet metal brake can bend boxes or pans to almost any depth since it doesn’t rely on conventional finger depths. Runs on 240V single phase power and will work at virtually any site. 1250mm length with a maximum capacity of 16 gauge mild steel. The breakthrough open-ended design allows you to create enclosed ducts and shapes impossible to make with a traditional box and pan brake. 6 tonne magnetic power is consistent across the entire beam, allowing for crisp bends even in the middle of the brake. Scaled stroke angle control lets you deliver repeatable bends time after time. You can set up the mild steel clamping bar with straight bars (of various widths if you had very tight boxes to make) for straight bends or segmented clamping bars for box and pan applications. Blade gap adjustment on the clamping bars lets you work with sheet metal of?? different thicknesses. You can remove the bottom leaf’s bending extension for the tightest bend dimension between bends of .625”.

 

Each JDC electromagnetic sheet metal brake from???? offers:

• Open-ended design – The open top gives you the flexibility to make any kind of bend imaginable, including enclosed boxes or triangles.
• Magnet with 6 tonne of force – The powerful magnet holds the material in place so that you can clamp it within the open concept design.
• Foot pedal or push-button controls – Engage the magnet and leave your hands free to guide the material.
• Small footprint – This do-it-all machine doesn’t take up much space in your shop.

Recommended for:

• HVAC shops, industrial art shops, and general sheet metal fabrication shops.
• Making duct work, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more.

Easy, hands-free operation:

• Put a piece of material between the clamping bar to the depth required.
• Engage the powerful magnet in the bending bed with push-button control.
• Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material.
• Lift the bottom bending leaf to complete the bend.

 

Specifications

Nominal capacity	1250 mm x 1.6 mm (4ft x 16g)15 to 635 mm
Clamping force (with standard full-length clamp bar)	6 Tons  is consistent across the entire beam, allowing for crisp bends even in the middle of the brake.
Recommended for	HVAC shops, Tech schools, industrial art shops, and general sheet metal fabrication shops. Making enclosed boxes, triangles, alternate bends on varying planes, and round items such as scrolling applications. Bending a variety of materials, including sheets of mild steel, stainless steel, aluminium, coated materials, heated plastics and more.
Electrical Supply:	1 phase, 240V
Nominal current:	8 Amp
Duty cycle:	30%
Box Depth	Unlimited
Bend Angle	0-180°
Max. Clamping Bar Lift	Unlimited
Max. Capacity with Extension	18ga. (1.21mm) mild steel / 21ga. (0.83mm) stainless steel
Max. Capacity without Extension	16ga. (1.51mm) mild steel / 20ga. (0.91mm) stainless steel
Thermal Cut-Out	(70°C)
Packing Dimensions	1.41m x 0.38m x 0.32m = 0.17m3
Weight	180/150kg
Blade gap adjustment	Blade gap adjustment on the clamping bars lets you work with sheet metal of different thicknesses.
adjustable back gauges	Comes with product supports and adjustable back gauges for production runs.
Scaled stroke angle control	Lets you deliver repeatable bends time after time.
Notes	Capacities can change depending on set up leaf extension. Rule of thumb for mild steel, 16ga., extension OFF. 18ga. extension On or Off, 20ga. and thinner, extension On.
Easy operation	1.Put a piece of material between the clamping bar to the depth required. 2. Engage the powerful magnet in the bending bed with push button control. 3. Hit the foot pedal that softly clamps the material. This foot control keeps your fingers safely out of the machine and you to reposition the material. 4. Lift the bottom bending leaf to complete the bend and repositioned ready for another bend.
open-ended design	1. allows you to create fully enclosed ducts and shapes impossible to make with a traditional box and pan brake.2. JDC BEND electromagnetic sheet metal brake can bend boxes or pans to almost any depth, since it isn’t reliant on conventional finger depths.
Standard accessories	include a storage tray, adjustable backstops, A full-length clamp-bar, and a complete set of short-length clamp-bars.
Optional accessories	available for these models include a narrow clamp bar, a slotted clamp bar for forming shallow boxes more quickly
Special tooling	Special tooling can be quickly improvised from pieces of steel to help fold-up difficult shapes, and for production work the standard clamp bars can be replaced by specialised tooling
Operator Safety	Operator Safety is enhanced by a two-handed electrical interlock that ensures a safe pre-clamping force is applied before full clamping occurs.

 

JDC BEND BENDING CAPACITIES (WITH STANDARD FULL-LENGTH CLAMPBAR)

MATERIAL (yield/ult. stress)	THICKNESS	LIP WIDTH (minimum)	BEND RADIUS (typical)
Mild Steel (250/320 MPa)	1.6 mm	30 mm*	3.5 mm
	1.2 mm	15 mm	2.2 mm
	1.0 mm	10 mm	1.5 mm
Aluminium Grade 5005 H34 (140.160 MPa)	1.6 mm	30 mm*	1.8 mm
	1.2 mm	15 mm	1.2 mm
	1.0 mm	10 mm	1.0 mm
Stainless Steel Grades 304, 316 (210/600 MPa)	1.0 mm	30 mm*	3.5 mm
	0.9 mm	15 mm	3.0 mm
	0.8 mm	10 mm	1.8 mm

 

Read less...

To contact Aussie Car Hoist about Electromagnetic Sheet Metal Bending Folding Machine Brake Press 1250mm use Get a quote.