Australia's #1 industrial directory for equipment & suppliers

Emergency Lighting

Supplier: Australian Workplace Test & Tag

Employers have a legal requirement to have emergency and exit lights tested every six months and the results recorded according to Australian Standards 2293.2:1995

CONTACT THIS SUPPLIER TO FIND OUT MORE

Emergency Lighting

Employers have a legal requirement to have emergency and exit lights tested every six months and the results recorded according to Australian Standards 2293.2:1995

In the case of electrical failure or other emergency, it is imperative the emergency and exit lighting systems on your site are working 100% so that people may safely and quickly make their way out of the site.

AWTT performs on site testing of your emergency and exit light systems to Australian Standard 2293.2 to ensure that in case of emergency these systems are fully functioning.

AWTT conducts a 6 monthly and yearly procedure to ensure that the Australian Standard is being met

AWTT Perform the following test 6 monthly:

  • Ensure there have been no power interruptions for 16hrs prior.
  • Inspection of fluoro lights for blackened ends, if observed replacement of tube is required
  • For Manual Discharge for 90 minutes to simulated power failure. Light must stay illuminated for no less then 90 minuets.
  • Reinstate light to normal operating condition and check that the battery charger operation indicator functions correctly.
  • For Automatic discharge test. Ensure the unit operates correctly by a visual test to identify each indicator light is operational.
  • Failed lights shall need replacement or repair.
  • 12 monthly testing is as above plus
  • Clean all light emitting and reflecting surfaces
  • Record all test results for both 6 month and 12 month testing and deliver to staff and place a copy in the switchboard.

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more