Australia's #1 industrial directory for equipment & suppliers

Enviro HP1200

Supplier: Waterproofing Technologies

Enviro HP 1200 is a solvent free, 2 component spray applied polyurethane waterproof membrane.

CONTACT THIS SUPPLIER TO FIND OUT MORE

It is uniquely formulated to provide high elasticity, tensile and tear strength. It also possesses excellent abrasion resistance.

Enviro HP1200 has been tested by the CSIRO and passes all requirements for AS4654.1:2009 (external area waterproofing).

Advantages

  • 100% waterproof
  • Very low voc content
  • Elastomeric
  • Fast system application
  • Convenient 1:1 vol/vol mix ratio
  • Fast curing
  • Spray applied
  • Solvent free
  • Excellent abrasion resistance
  • Excellent durability
  • Seamless application
  • Trafficable
  • Excellent substrate adhesion (using suitable primers)

Uses

To provide a 100% effective waterproof membrane for the following areas:

  • Podiums
  • Green roofs
  • Flat roofs
  • Balconies
  • Planter boxes
  • Car parks
  • Retaining walls 

Physical Properties

Enviro HP 1200 is supplied as a 2 component spray applied waterproof membrane

  • AS4654.1:2009 (External Membrane) Approval - Pass
  • Colour Green and Grey
  • Wet Are a Membrane AS4858:2004 Class 3 - Pass
  • Water Vapour Permeability – 2g/m²/day
  • Shore A Hardness 80±3 AS1683.15 .2
  • DIN EN 1297 (5000Hrs) Pass
  • Low Temp Water Tightness DIN EN 13 897.2 005.02 - Pass
  • Dynamic crack bridging 0.2mm ZTV-SI B 90
  • Tensile Strength >7.9MPa AS1683.11 / ISO37
  • Mix Ratio 1:1 vol/vol
  • Elongation >370% AS1683.11 / ISO37
  • Pot Life 12 seconds at 25?C
  • Abrasion Resistance 228mg AS 1683.21
  • Water absorbtion - Pass - (1% AS3558:1999)
  • Crack Bridging 2mm ZTV-SIB 90
  • Density 1.06 g/cm³ AS1683.4
  • Tear Propagation Resistance 14 N/mm DIN 535 15 / ISO34-1
  • Adhesion (concrete) >1.0 MPa DIN 1048

CONTACT THIS SUPPLIER TO FIND OUT MORE

Showcase your business!

Connect with 600,000 industrial buyers annually

Learn more